Sum pachi with no power to shooter or payout

[Harv_e]

Hello,
I am a new member that joined before I went out and bought a Pachi. I read most of the threads on the site and saw most issues could be traced back to the Dongle. I found a local person selling a Sumo Pachi so I decided to jump in and purchase it. The machine worked until a year ago and it has just sat until now.
The shooter does not work and the payout seems to be down as well. At the moment the LCD and everything works including sound. There is no dongle and I have replaced the fuses. I cant find a reason for no power to the shooter or the payout but I suspect its the connection that comes apart for service with the handle that inserts it. I have added hundreds of balls to ensure that wasnt the issue. The blue F1 module has a button and a window which I assume it is a power light and it does nothing when pressed. Any help would be appreciated and I love the site.


SAM_0250.jpgSAM_0248.jpgSAM_0249.jpgSAM_0245.jpgSAM_0247.jpgSAM_0246.jpg

[MrGneiss]

WELCOME!!!



The button on the B1f Control System is a reset button and the window is where error numbers are shown..

With this frame the B1f Control System controls the shooter and payouts so it is likely that it could be a problem with one of the connectors there..

Could you posably post pictures of the full front and back of your machine with all the doors and covers closed??

[Harv_e]

Sure, Ill post later today. Thanks for the quick reply.

[Ikaria]

I may have some parts if it turns out your missing something. I don't have the bf1 control system anymore since it went to another member.

[Harv_e]

Here are the requested pictures.
Thanks guys. I will go over all the connections again.

SAM_0251.jpgSAM_0252.jpg

[Drunkenclam]

Welcome



Nice looking playing field Hope someone can assist you

[yose]

I don't see any balls in the top tray or the feed tube.

[Harv_e]

It looks like its the B1F module. I get power in but it is not working. Ill try filling it up with balls just in case. Thanks

[Drunkenclam]

It looks like its the B1F module. I get power in but it is not working. Ill try filling it up with balls just in case. Thanks

Make sure the ball dump is closed and the gate from the hopper is open

[Harv_e]

ball dump and gate? Im assuming the gate is the door in the ball hopper and it is open.

[Moparformances]

when you fill the top hopper make sure your balls work there way all the way down the right side to the payout motor.. about 3/4 of the way down to the bottom

[MrGneiss]

This is how it should look when its full of balls..

Balls1.jpg Balls2.jpg

[Harv_e]

This is how it should look when its full of balls..

Balls1.jpg Balls2.jpg

Thanks guys. I have done that and still no change. Must be the module.