Newbie with first new Pachinko

[Drunkenclam]

Welcome Aboard



I would say try adjusting the two pots located on the B1f .
Good Luck

[rollerkid]

I have moved the pots with no luck. Its almost as if the power to the shooting mechanism is turned off.

[Drunkenclam]

Another thing to to is to check that your making a good ground on to the shooter ring. My wife always has problems with my machines because her small hands don't always touch the ground ring on the shooter.

Hmmm these machines with B1f boards don't seem to be the most reliable.

Failing that you might have to explore abit, Check the connections to the shooter and back. Short out the return and see if you get any shooter action. Check the output to the shooter hammer (or what ever its called)

[owennewton]

Seeing as a number of these seem to have issues I wonder if it could be a bad cap on the controller as these are all hitting the age that caps seem to like to die even if not being used

[Drunkenclam]

I'd sure like to get my hands on one and have a play May come back in worse condition
Would need to trace the wiring from the B1f to the shooter and hammer. Checking for voltage/signal all the way. Could be a bad cap. But could be anything else as well