Got Ball Problems!

[WOEII]

[luckydog]

it looks like you need to adjust the nails a little.

i use a 1/4 inch socket screwdrive with a very small socket on it to adjust mine.

if you use pliers wrap tape around the jaws to keep from damaging the nails

[WOEII]

it looks like you need to adjust the nails a little.

i use a 1/4 inch socket screwdrive with a very small socket on it to adjust mine.

if you use pliers wrap tape around the jaws to keep from damaging the nails

[JamesM]

That's a nice looking cell. Can we see more of it ?

[Moparformances]

off site pictures... cant see a thing

[Sid]

off site pictures... cant see a thing

34nm79v.jpg

[WOEII]

That's a nice looking cell. Can we see more of it ?

[Habious]

Yeah...you've got some serious issues with your balls there. I'd suggest you have a professional take a look at that.

For starters...there are THREE of them! That's never good.

They're only supposed to travel in pairs.

[SteveJ]

Holy Toledo that's a good lookin' machine!

[WOEII]

Holy Toledo that's a good lookin' machine!

Thanks a bunch man! I picked up a special wax for the cell. See right side about the 2o'clock position from post #7 you can see some greys wear from the balls. This wax should fix that right up. I just need some time to get at it. Here are a couple more pics for ya.

[yose]

It looks like those pins have bent to stop the balls from going in the lower pockets

[wrkey]

DANG THAT MACHINE IS BRIGHT!

[Drunkenclam]

My honey had all the pins to the bottom pockets bent to prevent entry. but a little tweaking solved it