Ball Lifter Parts Sticks & More!!

[hanabi]

One of the usual Japan based sellers has some ball lifter parts for sale, 2 'sticks' as they are calling them

Pachinko ball Liftter Parts Stick on eBay (end time 11-Feb-11 09:13:55 GMT)

Starting price of $35

ball lifter parts stick.JPG

[Moparformances]

great find Angie... i would love to have an original..

but i ended up making my own for way less money... if anyone is interested i would be willing to help them...

[TilionMtl]

Share share Mopar how do you made it? I'm curious.. I had to extend mine so the balls lifter can handle the cabinet I made.

[Moparformances]

local true value has a little cart.. there is all kinds of flat aluminumn stock.. 90 degree stock.. ournd pipe and square box tubing.. they have a sice that is about 5/8 inch or so..

it was to big to slide my spring over so i used my belt sander and rounded it off.. cuting all the way threw on the coeners.. with the spring over the top it pinched the ends down...

also had to cut a notch in the bottom to fit like a factory one..

the nice part is the original tube i bought was 3 or 4 feet long so you could use it to lift higher and fill more then on machine if needed

Lifter tube.jpgLifter tube (1).jpgLifter tube (3).jpg

[TilionMtl]

That's what i used to extend the tube of my balls lifter too So that must be a not so bad idea after all hehehehe

[BigBearSteve]

Here's what I used,

It's 1/2" CPVC pipe and a coupling.

I took a heat gun and formed the end of the coupling square to fit the lifter tube.

007.jpg

[rubberratt]

Those square tubes are hard to obtain. If someone had a few battle counters that were missing the up-tube (COMPIRATE) they should snag those.

for extending... I got a few 3' springs from YJA, they work great. I APPLAUD the creativity of the solutions you guys have implemented

[hanabi]

Same Seller has now listed more 'used' ball lifter parts

Pachinko ball Liftter Parts Lot on eBay (end time 10-Feb-11 19:01:31 GMT)

Starting price is $135

ball lifter parts 1.JPGball lifter parts 2.JPG