first pachinko machine

[AlienFanatic]

Today i bought a Sanyo Comet II pachinko machine. It works pretty good, albiet the fact that the payout jams sometimes. What type of power supply would i use? The spot with the wiring has three prongs sticking out in a vertical line. Please leave a speedy response.

[pinball wizard]

most of us use a 9 volt wall wart for power,some use a 9 volt battery.the power is only for the lights,you can still play it without power .post some pics of the back,we can help you get it working.

[hanabi]

Welcome to PachiTalk!!

I'm sure or members would also love to see pics of the front too, it always great to see all the variations in cell designs etc

[Moparformances]

Welcome to Pachitalk

like stated above i like wal warts.. others find a 9 volt the way to go..

please post pics when ya have time

[AlienFanatic]

here are the images
http://filesmelt.com/dl/0905101054.jpg
http://filesmelt.com/dl/0905101054a.jpg
http://filesmelt.com/dl/0905101605.jpg
http://filesmelt.com/dl/0905101605a.jpg
http://filesmelt.com/dl/0905101606.jpg
http://filesmelt.com/dl/0905101607.jpg
http://filesmelt.com/dl/0905101607a.jpg
http://filesmelt.com/dl/0905101607b.jpg

[Microbus99]

Nice machine!!

Welcome to PachiTalk!!

[ACMech]

Welcome!
I just wired up a newly acquired Sankyo today (I'll post my new find in a thread tomorrow). I would start by making sure it all works with a 9v, before I thought about moving on to a wall wart. There are a lot of threads out there on wiring, but note that of the three wires, it's very common to only need to use two to get your lights working. The third was for the manager of the pachinko parlor to monitor ball status. If you try and wire it up, the lights will come on, but generally will bypass the microswitches

Best of luck,

[MrGneiss]

WELCOME!!!