HC Error spitting out tokens wont stop

[RKnarr01]

I just picked up and turned on my Yajyu machine and it wont stop spitting out tokens playing music and flashes a HC Error code on the front of the machine i cant find what a HC Error code is anyone help?

[TatooedLady]

on the downside, I don't know what the error is....on the UPside, however, this is a GREAT time to make sure all the lights are working..

[RKnarr01]

i figured it out theres a switch that makes the hopper empty all of the tokens in it and it was on.

[d mowery]

Be nice if them buggers were marked with stickers so we would know what they were, In english that is , Hey anybody have any that they can post and we could copy and stick on with tape or glue , ?

[TatooedLady]

sure..........
"OFF" and "ON" feel free to cut/paste/glue/etc away! :smt083

[d mowery]

All these comedins out of work and we got one right here :grin:

[arbycoffee]

And she is prettier than roseann barr too! :grin:

[TatooedLady]

Arby, I don't know if I should THANK you or toss a hot soldering iron in your lap for comparin' me to that. (even favorably) :lol:

[arbycoffee]

way prettier, way way way way times 10http://www.users.qwest.net/~arbycoff...ns/worship.gif

[Utopia1dc]

http://pages.prodigy.net/rogerlori1/...s/doghouse.gif

[arbycoffee]

this would be more useful http://www.users.qwest.net/~arbycoff...omeatmyage.gif

[Sequimwa]

i figured it out theres a switch that makes the hopper empty all of the tokens in it and it was on.

I also have this problem, but cannot locate the switch you refer to. Please reply. Thank you.

[luckydog]

if you have a switch or button, it will be somewhere on the power supply.

[alstonj1]

you may not have a dump switch not all machines do . how ever if you don't its a simple problem . the machine doesnt see the coin as its passing by the sensor .take the hopper apart and clean the sensor (mounted somewhere in the coin path ) just wipe it off with a soft cloth dont use windex or anyother type cleaner it shouldnt be needed.Some machines mostly older ones have a mechanical arm that activates a switch (some optical some just a micro switch) every time a coin goes through it hits the arm activating the switch .over time this arm gets stuck and doesnt snap back for the next token and the machine doesnt see it so it keeps turning sending out more tokens then its suppose to till it errors. lubricate that arm and it should move freely and the problem will be gone .Also check the wiring to the sensors and the hopper and look for any bad pins or broken wires.

[computer bob]

And she is prettier than roseann barr too! :grin:

Geeze Arby ... even you are!