Help Identify my Pachinko

[hanabi]

I'm in the same boat with a recent purchase. I need help to identify my machine.

Welcome to PachiTalk!!

If you can tell us a bit about your pachinko, and ideally some pics of the Front and Rear of the machine, the Members here will be able to help

A new thread might be best, then you can easily locate the information whenever you need to refer back to it

[Moparformances]

I'm in the same boat with a recent purchase. I need help to identify my machine.

I would say to start your own thread and post a few pics.. any help hear is usualy quick and always free... sometimes painfull but always free

Welcome to Pachitalk

[rod3926]

I feel like a dumbo but I don't see how to insert photos. Gotta be easy.

[hanabi]

I feel like a dumbo but I don't see how to insert photos. Gotta be easy.

It is easy, but only when you know where to look

You need to click 'go advanced' and use the paperclip icon thingy, but

Here's a link that explains better than I can

how to post a pic

[rod3926]

I bought this machine at a garage sale and I did not know anything about Pachinko but I'm learning. Can you help me identify this one?

[hanabi]

I bought this machine at a garage sale and I did not know anything about Pachinko but I'm learning. Can you help me identify this one?

I can see that it is a Nishijin model, although I don't know the title myself,

I'm reasonably sure one of our other members will recognise it and also be able to date it for you

As I would consider this to be a 'Modern' I will move your posts and give them a thread of their very own in the Modern Pachinko Forum...and here we are!!

[compirate]

CR撃墜王

CR Gekitsuioh

King Kill?

1995

[KimbaWLion]

and THE man comes through...

[rod3926]

Thanks for the ID. Now that's done. Second thing is it works except the payoff. Everything else seems to work. When you load the balls in the top they roll down and stop at what looks like two electronic "gates". These do not work. On the front the numbers in the lower right hand do not light up and the red and green button do not seem to work. I've cleaned it up fairly well but have no schematics and no directions of how it works...only what I've learned in hours of tinkering.

[candyflip]

CR撃墜王

CR Gekitsuioh

King Kill?

1995

A little more on the title of your machine:

撃墜ゲキツイげきつい Gekitsui - shooting down (aircraft)撃墜noun
王オウおう Ou(1) - king / ruler / sovereign / monarch / (2) king (for senior player) (shogi)王noun

So a decent stab would be King Kill, but I would say King Shooter, or perhaps Shooter King would be closer.

Or just stick with 'Geh-key-sue-ee Ooh' ...

[Moparformances]

Thanks for the ID. Now that's done. Second thing is it works except the payoff. Everything else seems to work. When you load the balls in the top they roll down and stop at what looks like two electronic "gates". These do not work. On the front the numbers in the lower right hand do not light up and the red and green button do not seem to work. I've cleaned it up fairly well but have no schematics and no directions of how it works...only what I've learned in hours of tinkering.

can ya post a pic of the back side close up of where the balls stop rolling..

as for the buttons on the front thouse are for parlor use.. we call them ball loan buttons.. what your needing is a Dongle to get them working... a Mordern machine is nothing with out a dongle.. but thats just my oppinion..

hears a great vid on how the dongle works..

YouTube - Daverobs Wonderful Dongle Part 2

if ya do a search of the word Dongle u will get tons of information

Long Live Daverob

[rod3926]

The part in my hand feeds balls back into the front tray to be played again. It is loaded from the top and the balls stop where you see the solenoids (gates). I assume they open up when the machine pays.

[rod3926]

Sorry, I set these upright.

[Moparformances]

hate to ask the dumb question but how meany balls do ya have???

that machine is going to need a few hundred to do anything...

can ya fill the hopper and take a pic.. are the balls making it all the way to the solonoids..

hate to be picky can ya shoot a closer pic...
______________________________________________________
your first pic shows a few balls but it loks like there stuck before the payout solonoids

[rod3926]

I guess I have a hundred or so balls. I haven't counted them. Sorry but my camera just broke (battery problem). The balls do reach the solenoids.

[Moparformances]

gona need some help from other hear to confirm this...

my guess is that 100 balls may not be enough.. pachinko machines have a sensor that tells the machine it has enought pachinko balls to opperate...

now on your machine im not sure where that sensor is located but 100 may not be enought.. when a machine does not have enought balls it shuts its self down till more balls are loaded..

hope this makes sense to ya.. if im wrong hear some one will jump in and set ya in the right direction..

my answer is get more pachinko balls.. even if this is totaly wrong once ya get it working your going to need way way more then 100 to play it..

luck to ya

[JACKSJE4]

In my experience, you need a minimum of 500 balls to get a machine like this to work properly, but I load mine with 2,000 balls just to reduce the number of times I need to refill the jackpot hopper while I am playing it.

I think 100 balls is not enough to to fill the ball channels and trip the sensors needed to get the machine working properly.

[rod3926]

Thanks to all for your replies. I guess my next step is to by some balls.

Blessings,

Rod

[KimbaWLion]

Yep! And you have a few places to get them at good prices! Enjoy your Pachi when you get your pachi all loaded up!

[wrkey]

Or just stick with 'Geh-key-sue-ee Ooh' ...

I like ... Sue-Key-ooh Geeeeeh-key Sue-Key-ooh

I think it has something to do with flying monkeys!