Page 1 of 4 1 2 3 4 LastLast
Results 1 to 20 of 63

Thread: Pachislo Parts Updated

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Tokie Owens MrTechnoBarn's Avatar
    Join Date
    Apr 2010
    Location
    North Carolina
    Posts
    3
    Thanks
    0
    Thanks Received
    6

    Exclamation Pachislo Parts Updated

    An earlier post here gave some information on finding Pachislo parts, now this information appears to be outdated and I'm looking for some parts for several machines. Stealth Amusements informed me they had moved and they basically eliminated a lot of their parts inventory. The links from user Applegrove appear to be dead as well (it appears his last activity here was in 2007) so what now? Anyone else have any links to parts vendors for Pachislo's? Any help would be greatly appreciated...

  2. #2
    Eye Shooter monkeyboy's Avatar
    Join Date
    Oct 2007
    Location
    Orlando, Florida
    Posts
    968
    Thanks
    924
    Thanks Received
    1,627

    Default Re: Pachislo Parts Updated

    What parts are you looking for?

    I have a few left over from a King Camel that got parted out.

  3. #3
    Tokie Owens MrTechnoBarn's Avatar
    Join Date
    Apr 2010
    Location
    North Carolina
    Posts
    3
    Thanks
    0
    Thanks Received
    6

    Default Re: Pachislo Parts Updated

    Quote Originally Posted by monkeyboy View Post
    What parts are you looking for?

    I have a few left over from a King Camel that got parted out.
    These are the parts I am currently looking for, list could grow as a I acquire more machines:
    1. Reel motor - Macy Continental III machine, reel motor has decal with Universal M9045 stamped on the side of it.

    2. Sammy Aladdin Sound Board - Board has number SS07BC68 stamped on it.
    Thanks for any help...

  4. The following 2 users say "Thanks" to MrTechnoBarn


  5. #4
    Tokie Owens MaliciousMelhorn's Avatar
    Join Date
    Dec 2010
    Location
    Pittsburgh, PA
    Posts
    18
    Thanks
    6
    Thanks Received
    11

    Default Re: Pachislo Parts Updated

    I also am looking for some parts; I contacted Stealth Home Amusement today, and he is looking for me, but it did not sound hopeful. I need a stepper motor for a 2003 Hanabi Fireworks 3 Reel Slot Machine. Any idea where to go about getting one?

  6. #5
    Tokie Owens ACMastan's Avatar
    Join Date
    Sep 2021
    Location
    Grand Island
    Posts
    4
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo Parts Updated

    I am looking for a hopper for a Macy Continental III. If you decide to sell parts please let me know.

  7. #6
    Tokie Owens woilly's Avatar
    Join Date
    Dec 2012
    Location
    canada
    Posts
    5
    Thanks
    0
    Thanks Received
    0

    Default Re: Pachislo Parts Updated

    Hi iM lokking for a step motor part number. ts3103n77 the optic is integrated int the step motor..
    If you have one for sale i am interested to buy it..

    Thanks

  8. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Pachislo Parts Updated

    Quote Originally Posted by woilly View Post
    Hi iM lokking for a step motor part number. ts3103n77 the optic is integrated int the step motor..
    If you have one for sale i am interested to buy it..

    Thanks
    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  9. #8
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: Pachislo Parts Updated

    Oh no...we usually suggest Stealth...
    Dawn

  10. #9
    Fever Hunter Ripweade's Avatar
    Join Date
    Jun 2010
    Location
    Slatington, PA
    Posts
    140
    Thanks
    567
    Thanks Received
    191

    Default Re: Pachislo Parts Updated

    Add me to the list of looking for a part.

    I have a Net Trip Devil pachislo from like 1998 or so and the small, fluorescent light above the reels is dying. I contacted Stealth (where I bought it in 1998) and he asked for pics. I sent the pics and... Nothing. No answer. No replies. Stealth seems to be dropping the ball.

    Bill

  11. #10
    Dr. Frankenpachi alstonj1's Avatar
    Join Date
    Aug 2005
    Location
    morrisville pa
    Posts
    2,671
    Thanks
    358
    Thanks Received
    1,904

    Default Re: Pachislo Parts Updated

    most fluorescent lights are available at home depot or lowes there should be a number on the bulb like F8T5CW thats what your looking for it is the description of the bulb much like a vin on a car f=florescent 8=8 watt t5 is the bulb width in this case 5/8" inch and CW is cool white . as for the stepper motors i doubt they are bad most stepper motors are very reliable most likely you have a bad connection in the plug that connects it to your machine (broken wire or broken pin ) either on the motor side plug or the machine side jack or plug take a meter on ohms with the power off on the machine and insert the probe in the pin hole on the back of the plug then insert the other probe on the pin in the back of the corresponding other sides jack you should read zero to a few ohms nothing more if your reading nothing its open .if you do a search for " stepper motor " youll find a few threads that explain stepper motor theory and how the machine uses them . dont be afraid to flex the connectors a bit (with the power on and other reels spinning )and see if the reel starts to work if it does you have a bad connection .especially on that old macy they are very reliable i would expect the power supply or mother board to go before the steppers on that machine .

    Last edited by alstonj1; 12-27-2010 at 03:13 PM.
    Jeff

  12. The following 4 users say "Thanks" to alstonj1


  13. #11
    Fever Hunter Ripweade's Avatar
    Join Date
    Jun 2010
    Location
    Slatington, PA
    Posts
    140
    Thanks
    567
    Thanks Received
    191

    Default Re: Pachislo Parts Updated

    No numbers or markings at all on the fluorescent light. I also never saw one this size at any Lowe's or Home Depot. It's pretty darn small and skinny. IIRC, I think it's like 8-1/8" long. It also is hard-wired with a molex plug at the end.

    In other words, it's not the typical, run-of-the-mill fluorescent bulb.

    Bill

  14. #12
    Dr. Frankenpachi alstonj1's Avatar
    Join Date
    Aug 2005
    Location
    morrisville pa
    Posts
    2,671
    Thanks
    358
    Thanks Received
    1,904

    Default Re: Pachislo Parts Updated

    Jeff

  15. The following 2 users say "Thanks" to alstonj1


  16. #13
    Fever Hunter Ripweade's Avatar
    Join Date
    Jun 2010
    Location
    Slatington, PA
    Posts
    140
    Thanks
    567
    Thanks Received
    191

    Default Re: Pachislo Parts Updated

    Not really.

    http://i272.photobucket.com/albums/j...g?t=1293496300
    Hopefully the pic shows up... The bulb sits inside a plastic housing which snaps into the front door. The bulb itself is 8-1/2" long and has ceramic end caps. With the end caps, the length is 9-1/8" long.

    Actually, after looking at the other pic again, I guess it could be like those!

  17. The following user says "Thanks" to Ripweade


  18. #14
    Eye Shooter SlotsRfun's Avatar
    Join Date
    Oct 2009
    Posts
    538
    Thanks
    113
    Thanks Received
    1,012

    Default Re: Pachislo Parts Updated

    Quote Originally Posted by Ripweade View Post
    Not really.

    http://i272.photobucket.com/albums/j...g?t=1293496300
    Hopefully the pic shows up... The bulb sits inside a plastic housing which snaps into the front door. The bulb itself is 8-1/2" long and has ceramic end caps. With the end caps, the length is 9-1/8" long.

    Actually, after looking at the other pic again, I guess it could be like those!
    I have had good success with this company for hard to find bulbs. You can email them with your picture and any info and they will at least let you know what it is. odds are they have it!
    Replacement Light bulbs-Light Bulb and Lamp resource
    I am fairly certain it is a cold cathode backlight just like ones used in laptop screens.

  19. The following 2 users say "Thanks" to SlotsRfun


  20. #15
    Tokie Owens apache azua's Avatar
    Join Date
    Jul 2012
    Location
    Texas
    Posts
    7
    Thanks
    5
    Thanks Received
    3

    Default Re: Pachislo Parts Updated

    I need the exact bulb!

  21. #16
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Pachislo Parts Updated

    Quote Originally Posted by apache azua View Post
    I need the exact bulb!
    What bulb are you looking for?
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  22. #17
    Tokie Owens apache azua's Avatar
    Join Date
    Jul 2012
    Location
    Texas
    Posts
    7
    Thanks
    5
    Thanks Received
    3

    Default Re: Pachislo Parts Updated

    the bulb i need is similar to the one Ripweade posted a link to but after a quick measurement I found out I need a 12" bulb

  23. #18
    Dr. Frankenpachi alstonj1's Avatar
    Join Date
    Aug 2005
    Location
    morrisville pa
    Posts
    2,671
    Thanks
    358
    Thanks Received
    1,904

    Default Re: Pachislo Parts Updated

    Answer: 8.5 " = 215.9 mm check the voltage at the socket should be in the 500 volt range so watch your fingers .
    Jeff

  24. #19
    Tokie Owens MaliciousMelhorn's Avatar
    Join Date
    Dec 2010
    Location
    Pittsburgh, PA
    Posts
    18
    Thanks
    6
    Thanks Received
    11

    Default Re: Pachislo Parts Updated

    Hey guys, about the stepper motor issues, I checked EVERYTHING, and even consulted a so-called 'expert' out here in Pittsburgh, and he confirmed it was a bad motor (one of the windings is bad) and that I would indeed have to replace it. I wish it was as simple as a bad connection, but I am positive it is a bad motor. Which leads to me the conundrum of where the heck to get one...I really want to get this machine up and running.

  25. #20
    Dr. Frankenpachi alstonj1's Avatar
    Join Date
    Aug 2005
    Location
    morrisville pa
    Posts
    2,671
    Thanks
    358
    Thanks Received
    1,904

    Default Re: Pachislo Parts Updated

    Quote Originally Posted by MaliciousMelhorn View Post
    Hey guys, about the stepper motor issues, I checked EVERYTHING, and even consulted a so-called 'expert' out here in Pittsburgh, and he confirmed it was a bad motor (one of the windings is bad) and that I would indeed have to replace it. I wish it was as simple as a bad connection, but I am positive it is a bad motor. Which leads to me the conundrum of where the heck to get one...I really want to get this machine up and running.
    The only person who has an old macy machine that might have a spare motor is FTKservices but he hasnt posted in some time .send him a private message and you might be able to get one from him . Otherwise i'd recheck your connections cause i doubt anyone has a motor for an old macy machine. pictures of the reel and motor might help jog someones memory though .
    Jeff

  26. The following user says "Thanks" to alstonj1


Page 1 of 4 1 2 3 4 LastLast

Similar Threads

  1. pachislo parts
    By otis51 in forum Model Talk
    Replies: 16
    Last Post: 08-13-2007, 06:17 AM
  2. Pachislo Collection Website Updated
    By gwarzin in forum Model Talk
    Replies: 19
    Last Post: 04-16-2005, 11:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •