Craigs list

[salamone34]

Is this a good machine?
Pachinko Machine

[Moparformances]

looks like a model "B"

bb nashijin sword pop up front close.jpg


the center is neat cause the 2 red pieces pop up and down when balls enter..

it says he has balls??

my first impresion says to bad it been stained tor painted

i would offer less.. but im cheap

[Moparformances]

Is this a good machine?
Pachinko Machine

opps never answered your question

yes its a good pachinko... but i have never seen a bad one

[Microbus99]

It would probably be a good idea to ask the seller for some additional photos of both the front and the rear. Unfortunately, in my opinion, the stained frame knocks it down to $25 - $30.

However, like Mopar said, a Nishijin B is a good machine if all the parts are there.

[mudfud]

check that the ball track (upper right) has a white cover with a spring. while it's easy enough to make a replacement, a real one will cost over $25 from vintage pachinko.

also look for the clear covers over the jackpot mechanism and the regulator seesaw. you can bargain down for that.

I kinda like the dark brown case, but if you like it stock, then that might be a bargaining point, too. is it in a frame/box? that's nice for wall mounting.

the cell is not that unusual, but if it's close by, comes with balls (those are almost 5 cents a piece now, shipped), was $40 or less, doesn't have water stains, and you don't have a nishijin B, then I would go for it!

[salamone34]

Hope I can get it

[mudfud]

if you don't, there are always nishijin B's showing up. I think they might be the most common. also, one of the most reliable, in my use.

[cardwwi]

[Moparformances]

if u deside to pass on this one but really want one i have several for sale.. with a range of price... and i might be speaking out of turn but i believe that mudfud has a few as well..

good luck to ya either way

[salamone34]

Okay cool I have Pachislo machines not one of these.

[subdude]

It would probably be a good idea to ask the seller for some additional photos of both the front and the rear. Unfortunately, in my opinion, the stained frame knocks it down to $25 - $30.

However, like Mopar said, a Nishijin B is a good machine if all the parts are there.

I did that over a week ago & still haven't heard from him. I assumed it sold or it has issues.

[salamone34]

This person wont reply to me about the machine, but that is Craig's list for you. My family is in Prescott also.

[subdude]

This person wont reply to me about the machine, but that is Craig's list for you. My family is in Prescott also.

I'm in Peoria now. I haven't figured out how to change it

[salamone34]

Well if you ever want to have a pachislo meet let me know