Page 2 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 21 to 40 of 82

Thread: Power Flash in my area

  1. #21
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    Ok... the machine is now in my possesion. After doing an in depth inspection there I agreed to pay the seller the full asking price of $150. Over all the machine is in good shape but as normal has lots of dust and 'bug dirt'. The cell is in great condition with no fading with all the labels which all appear to be vibrant. Now for what's wrong.

    There was some 'modifications' made to prevent the empty hopper devices from preventing balls from being shot. Due to this, several of the wires have been bent and contorted.

    Also, the plastic holding bracket is broken that holds the wire that leads to the overflow tray lever that is used to shut off the ball feed when the tray is too full. I believe this plastic piece could be easily 'fixed'.

    Each of the tulips has a wire that extends into the solinoid layer that is used to manipulate the opening and closing. The wire on the lower right (Clubs) jack pocket appears to be missing. All others seem to be there and function OK.

    All the solinoids are there and move freely and the wires appears to be intact and non-corroded, but I was unable to test them.

    There is no transformer so no way to test and someone will have to purchase one.

    I did check out the jackpot wing device and it worked with the few balls that were still in the machine along with the jackpot rocker and winning ball release. In my opinion, this machine is 90% ready to run.

    So... I have a few that have expressed interest since I'm just a 'middle man' here I think this is what I will do. My preference to whom gets the machine goes like this provided they have the cash to purchase and pay for shipping. Shipping cost will be exact cost to ship. I plan on making no money here. Now, here's my order of preference:

    1. Some one who has no power flash will be on top of the list.
    2. Next will be someone who has a t-bird but not the little man.
    3. Anyone else.

    The idea here is to get these machines 'spread out' to members wanting but no having. Soon we'll all have one!

    Mbodi contacted me first but he has recently acquired to and agrees with my order of preference above. So right now that leaves Siouxzan and emmadog. If you two will tell me where you fit on the preference list we can see where things go. If anyone else fits this list and want to add their name to the lottery please reply here. If I get multiple people who don't have a PF and has the cash then I'll just put all the names in a 'hat' and pull one out as the 'winner'.

    This sound fair to all?
    Rusty Key

  2. The following 9 users say "Thanks" to wrkey


  3. #22
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: Power Flash in my area

    That sounds fair to me. A big Thank You to you for assisting with this transaction, since you are obviously only interested in supporting the hobby! Very nice!
    Dawn

  4. #23
    Pachi Puro emmadog's Avatar
    Join Date
    Jan 2009
    Location
    U.S.
    Posts
    2,860
    Thanks
    967
    Thanks Received
    7,183

    Default Re: Power Flash in my area

    I like your selection criteria, very fair. So I'm interested only if Siouxsan( or anyone else due to price or whatever) is not. Rescuing PF's is a hobby of mine. Thanks.

  5. The following user says "Thanks" to emmadog


  6. #24
    Fever Hunter SphereJunkie's Avatar
    Join Date
    Nov 2008
    Location
    Oklahoma City, Ok
    Posts
    192
    Thanks
    1,397
    Thanks Received
    587

    Default Re: Power Flash in my area

    Fair enough, count me in.
    _____________________________________________
    Tony, Sr. "T" CR Fever Star Wars Darth Vader, CR Super Sea Story
    Getting my pachinko fix one sphere at a time

  7. #25
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Power Flash in my area

    take bids and donate the extra to Pachitalk???

    is the shooter spring totaly missing??

    for thouse intested.. Radio Shack sells a great transformer for 12 to 15 dollers... it has a spliter wire so u can run the lights off of it as well so no need for extra power for the lights..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. The following user says "Thanks" to Moparformances


  9. #26
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    Good idea Mopar.. but.. I think I'll leave the donation option up to the recepient. I really don't want to 'sell it' for more than I paid as that's what I told the seller I would do. However, if the person who ends up with this wants to make a donation on their own to PachiTalk (seeing how it was this website that got them the machine) that is totally their option and will have no bearing on the purchase. I don't even want to know if the do or don't.

    As for the spring.. yes, the complete spring assembly including the aduster bracket is missing. Sorry I left that bit for information out on the previous posting. Thanks Mopar for reminding!
    Rusty Key

  10. The following 2 users say "Thanks" to wrkey


  11. #27
    Fever Hunter mbodi's Avatar
    Join Date
    Nov 2009
    Location
    Vermont
    Posts
    206
    Thanks
    154
    Thanks Received
    805

    Default Re: Power Flash in my area

    Quote Originally Posted by Moparformances View Post
    take bids and donate the extra to Pachitalk???

    is the shooter spring totaly missing??

    for thouse intested.. Radio Shack sells a great transformer for 12 to 15 dollers... it has a spliter wire so u can run the lights off of it as well so no need for extra power for the lights..
    Mopar, I picked up a 24 VAC 2 amp transformer at Radio Shack for the T-bird powerflash for $10. Works fine for the solenoids. Had 3 wires on the secondary side. I used the 2 black, is the yellow the splitter wire?

  12. #28
    Fever Hunter CoventryCat86's Avatar
    Join Date
    Nov 2009
    Location
    New England
    Posts
    152
    Thanks
    100
    Thanks Received
    289

    Default Re: Power Flash in my area

    Looks like I'm too late to this show. I don't have a Powerflash. however I'm very interested in getting one.
    The last man on Earth sat alone in a room. There was a knock on the door.

  13. #29
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: Power Flash in my area

    I don't think you are too late. I think this is still in the works.
    Dawn

  14. The following user says "Thanks" to dattia


  15. #30
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    Hey MBodi,

    I guessed at the type of transformer you purchased ( Model: 273-1512 | Catalog #: 273-1512 ) and found their online documentation for here. Here it is in it's entirety:


    25.2VAC
    �� 2A
    POWER TRANSFORMER
    NOTE:


    The 2 black wires on one side are for 120V input. The 2 yellow
    and 1 black wires on the other side are for output:


    one yellow wire + one black wire = 12.6V output


    one yellow wire + one yellow wire = 25.2V output
    Important:


    Do not join together all three output wires, as this will cause the
    transformer to short-circuit.

    But from your message above.. it appears that their documentation has the color coding on the output the exact opposite of what truly exist.

    Rusty Key

  16. The following 2 users say "Thanks" to wrkey


  17. #31
    Fever Hunter mbodi's Avatar
    Join Date
    Nov 2009
    Location
    Vermont
    Posts
    206
    Thanks
    154
    Thanks Received
    805

    Default Re: Power Flash in my area

    Thanks Rusty.
    Thats the one I bought. Didn't come with any paperwork.
    Thats will save me setting up a 9 volt battery for the lights.

  18. #32
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Power Flash in my area

    Quote Originally Posted by mbodi View Post
    Mopar, I picked up a 24 VAC 2 amp transformer at Radio Shack for the T-bird powerflash for $10. Works fine for the solenoids. Had 3 wires on the secondary side. I used the 2 black, is the yellow the splitter wire?
    yes the 2 black are for the 24 to the solenoids then splice into one black and the yellow that will give ya 12 for the lights...

    your lights are probably made for 10 volts but thats not any real issue.. they will burn out a bit faster having to much power but the benifit is they will be brigter.. when they do finaly burn out u can either buy the same so there bright or buy 12 volt so they last longer but are not as bright

    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  19. #33
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    I haven't heard from Siouxzan yet on if they are interested in this machine... and I'm not sure if everyone has had time to see this post. So I'm gonna wait until tomorrow evening to 'pick a winner'.

    Here's how the process will work. Once the lucky person is selected they will be notified here. They will then be expected to send to me the full cost of the machine purchase of $150 along with their shipping information. I will then pack and ship the machine and 'invoice' them for the shipping. Once they receive the shipping amount they can get that amount to me. This way we are only paying the true shipping amounts. If there are fees to be paid for the money transfer (paypal, etc.) then I would like for the buyer to pay for those as well. I figured this process will be the easiest and will insure we get the exact amounts transferred with out over or under pay.

    Good luck!
    Rusty Key

  20. The following 5 users say "Thanks" to wrkey


  21. #34
    Sandwich Shooter Siouxzan's Avatar
    Join Date
    Nov 2009
    Location
    Greater Seattle Area
    Posts
    344
    Thanks
    500
    Thanks Received
    1,240

    Default Re: Power Flash in my area

    Sorry about the delay. I didn't get online to get my pachitalk fix last night.
    I really appreciate all your help and the opportunity, but I'm going to bow out of this one. Between others that really want/need this machine, and the fact that I have 3 pachis in various states of restoration, I'm going to try and live without it for now.
    Hopefully another will come along. If it were an Arepachi, well, that'd be different.

  22. The following user says "Thanks" to Siouxzan


  23. #35
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    Siouxzan said "Hopefully another will come along. If it were an Arepachi, well, that'd be different. "

    If it were an Arepachi... this thread wouldn't exist!

    That baby would be mine I tell you, mine, mine, mine!
    Rusty Key

  24. The following 5 users say "Thanks" to wrkey


  25. #36
    Mr. Vintage wrkey's Avatar
    Join Date
    Oct 2008
    Location
    Spring, Texas
    Posts
    903
    Thanks
    467
    Thanks Received
    2,421

    Default Re: Power Flash in my area

    As of now here's how it stands.

    I have two parties interested that do not currently own a PowerFlash, their IDs are ConventryCat and Spherejunky.

    I have 3 parties that are interested that currently have PFs and their IDs are: MudFud, Emmadog and mbodi.

    I stated that I would give it a bit more time before the selection is made for the new ownership, so if any of the above names do not want to be on the list or if you want to add your name to the list...

    .. do so soon!
    Rusty Key

  26. The following 2 users say "Thanks" to wrkey


  27. #37
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Power Flash in my area

    Well I am sure appreciative of the time effort and trouble you have went to on behalf of Pachi talk members. Whoever gets it should feel lucky that they are members of a fantastic community with people like you for members.

    May the best NONOWNER get lucky. Everybody should have at least one of each kind.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  28. The following 2 users say "Thanks" to Lt Teddy


  29. #38
    Pachi Puro emmadog's Avatar
    Join Date
    Jan 2009
    Location
    U.S.
    Posts
    2,860
    Thanks
    967
    Thanks Received
    7,183

    Default Re: Power Flash in my area

    Nonowners huh? You gonna give up three of your Arepachis?

  30. #39
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Power Flash in my area

    Quote Originally Posted by emmadog View Post
    Nonowners huh? You gonna give up three of your Arepachis?
    Now who was saying anything about arepachis???

    Besides which they are more rare than powerflashs as we have found out over the last six months. And as far as cost I would say that an arepachi is more expensive because if you watched the way fed ex and ups handled packages you would not ship an arepachi if you had any other choice to get it. Too many things to go wrong in an arepachi unless your name is Eddie and you can tear one down and put it back together. That lets me out and a whole lot of other people. Besides which I would give up my Powerflashes before I would part with an arepachi.

    Seeing as how neither is going to happen it is a mute point.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  31. #40
    Pachi Puro emmadog's Avatar
    Join Date
    Jan 2009
    Location
    U.S.
    Posts
    2,860
    Thanks
    967
    Thanks Received
    7,183

    Default Re: Power Flash in my area

    Just pullin your chain LT!!! True enough about shipping although my two arrived in good shape. It will be interesting to see if the one enroute to me arrives intact but I did request xtra padding. And I concur with your moot point!!

  32. The following user says "Thanks" to emmadog


Page 2 of 5 FirstFirst 1 2 3 4 5 LastLast

Similar Threads

  1. How to Power a Power Flash / Circuit Racer Machine
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 06-19-2011, 08:53 PM
  2. Power Flash Alert! $50 S.F. Bay Area
    By JACKSJE4 in forum FB Marketplace, Craig's List and Other Listings
    Replies: 2
    Last Post: 10-09-2010, 06:06 AM
  3. Power Flush power flash
    By who922 in forum Vintage Pachinko
    Replies: 21
    Last Post: 07-12-2010, 11:12 PM
  4. If you want a power flash...
    By wrkey in forum Vintage Pachinko
    Replies: 1
    Last Post: 02-09-2010, 04:56 PM
  5. power to a power flash question
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 11-11-2009, 11:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •