Clicking IGT Machines: Harley, Spin Luck, Dragon Dice, etc.

[slotter]

WARNING. WARNING. Do NOT get confused by the pics being 180 degrees out of whack with each other. You could do serious damage during your vasectomy operation!!!!

[dattia]

EW!

[rob5]

Thank you both for the information. I think this is a great resource for all owners of pashislos and the more information the better!

Sorry about the confusion and the loss of time this issue may have caused anyone!

I will try the cuts on my King Camel and see if it quiets down a bit.

Thanks again,
Robert

[slothappy144]

Just for clarification what line # from the connector is the cut performed on? I found the stop boards usually are in 2 configurations BUT the connector is wired the same for most all machines 15 years or newer.

[logicprobe]

It's made in a spot where it will work, for THAT revision of board, within the circuit itself.
I also chose that location for the cut, so that it could be easily reversed... by using a bridge jumper between two larger pads.

I've never had the need to make this mod... it was done for Slotter.
And it's proven to be a good hack, for those that want it.

Ticking doesn't bother me, especially if it's in rhythm with the voices in my head when they sing. :lol8:

[slothappy144]

I can't hear any noise form mine either, too much other noise in the game room or my tinnitus drowns it out. Either way I don't need this mod either. It is good 'just in case' type of info.