Video Poker at Tucson, AZ Goodwill

[subdude]

The other reason may be that its pickup only. good thing for me I go near there alot.

[RaymondV]

Somebody got the poker machine for $21.50
If that thing works, that is a helluva deal

[subdude]

Somebody got the poker machine for $21.50
If that thing works, that is a helluva deal

I hope so. I'm probably going to go down sometime this week & pick it up. I'll let you all know if it works.

[RaymondV]

How did this machine turn out??

[subdude]

Well I gotta say that was the most ghetto goodwill I have ever seen in my life.
Anyways the machine is in great shape. No money inside plugged it in & got nothing. I drilled the locks out to access the inner workings & saw the switch was already on so I checked the fuses I could see all were good. The next step was to check all the connectors & I was able to get the light on the table to work & the signal light alternates top & bottom light. I push self test button & I hear a click from the speaker but monitor doesnt fire & the coin mech also appears to have no power but the bill acceptor cycles fine . It also has a coin lifter which is cool but no power to it either. I did find a nickel in the machine its in the coin compariter. Does anyone know where I can find a manual for this beast? its in real great shape I'm suspecting a power supply problem. Its made by IGT in '92

[RaymondV]

PM me your email address
I can send you 3 manuals in PDF format
One is 10.5 MB, the others are about 3-4 MB in size

[subdude]

PM me your email address
I can send you 3 manuals in PDF format
One is 10.5 MB, the others are about 3-4 MB in size

PM sent . My email should handle them individually. Thanks for the info.

[RaymondV]

PM sent . My email should handle them individually. Thanks for the info.

Manuals sent

[subdude]

Got the manuals just fine. Thanks a bunch. They are not for my exact machine but from looking at them I do see alot of similarities & I know where to start.
I can't wait to get started I will keep you all posted. Thanks again for the help & info.

[RaymondV]

Got the manuals just fine. Thanks a bunch. They are not for my exact machine but from looking at them I do see alot of similarities & I know where to start.
I can't wait to get started I will keep you all posted. Thanks again for the help & info.

Yeah, the diagrams show mostly the upright version of the PE+
The slant top has the same components, just in different positions.
All of the test functions, etc are the same.

[subdude]

Well so far I found all the fuses were ok But the flyback on the monitor is cracked from failure so that would explain why the monitor doesn't work. The candle on the top is showing tilt door open error (even with everything closed). The coin hopper works when I tested it on the bench but I still have no power to the coin mech. I'm wondering if the flyback took out anything when it failed & if repairing the monitor would be worth finding out.

[SlotsRfun]

The other reason may be that its pickup only. good thing for me I go near there alot.

Go in and ask if you can plug it in! I've done that is stores and never was refused.