Broken Part/Adjustments

[MaxxTheDog]

Hi All,
First of off, thank you for starting and contributing to this forum. I have owned one machine for a few years and just got another.
I got lucky with the first in that I cleaned it up and put some balls in it and it worked. I just got another machine and I thought that I would do a complete clean of all of the parts in the back and try to learn how it works.
I have run into a few issues.
I have a broken part at the feed tray area (Pic 1). The good news is that I have the broken piece. Is this really needed? It looks like a weight of sort.
I am also having an issue with the linkage by the payout tray (Not sure if this is what it is really called). (Pic 2 and 3 circle area)
I'm not sure how to set the linkage to the weights that show if there are balls present or not.
Finally as part of this linkage there is another part that has a nut in the middle of it. This is not attached to anything and again I am wondering if this is just another adjustment screw. (Pic 2 and 3 arrow)
Broken.jpg

Linkage 1.jpg

Linkage 2.jpg

Thank you again and sorry for what I believe is simple questions.

Once I get this working I'm hoping to build a wall mount box for it. I have seen some on this site, but does anyone have plans or dimensions that are easy to follow?

Thanks again.
Tom

[ebb]

Hi Tom and Welcome.
Did you get the machine working?
I have that part on the top if you still need it?
I'm still new to Pachinko's myself but
The rest of the machines seems to be in order.
The top rocker will open to feed balls to the lower hopper when the supply runs low. I found that it really need to be in balance to open and close when they should.

Send me a PM if you still looking for the part.