Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 21 to 40 of 64

Thread: Has anyone installed the Super AutoStop mod from PachisloUsa

  1. #21
    Pachi Puro Lazarus's Avatar
    Join Date
    Nov 2004
    Location
    WI.
    Posts
    2,389
    Thanks
    188
    Thanks Received
    1,264

    Default

    The others plug into the board but are on average fifty bucks. This one is a little cheaper. Only Pachislo USA has one with the credit mod. on it.

  2. #22
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    The credit mod is the only thing I'd be interested in.
    Meanwhile, somewhere in Oklahoma.

  3. #23
    Fever Hunter spooner's Avatar
    Join Date
    Dec 2004
    Location
    Oblivion
    Posts
    233
    Thanks
    1
    Thanks Received
    41

    Default

    What sort of time frame are you looking at Spooner?
    Because of my work load, I think it will be a couple of weeks before I can finish this.

    I also wanted to note that the other advantage of this mod besides for the price and auto credit feature is that it connects to the reel stop board of which there are only two different types so it should work in any machine regardless of the model or manufacturer.

    Thanks. ~spooner

  4. #24
    Pachi Puro Firewire's Avatar
    Join Date
    Nov 2004
    Location
    Midwest City, OK
    Posts
    2,669
    Thanks
    321
    Thanks Received
    281

    Default

    Great Spooner, looking forward to your finished product!
    Firewire

  5. #25
    TANK's Avatar
    Join Date
    Jan 2005
    Location
    Pompano Beach Fl.
    Posts
    417
    Thanks
    0
    Thanks Received
    0

    Default super chip

    just installed my first superchip in my hot-area. works great!! only thing i see is if i try to set timing between reel stops too long the chip dumps and machine must be powered down for 15-20 secs to allow chip to reset. no problem! just wonder if anyone else has seen this?

  6. #26
    Sandwich Shooter cwstnsko's Avatar
    Join Date
    Nov 2004
    Location
    Mesa, AZ
    Posts
    496
    Thanks
    38
    Thanks Received
    90

    Default

    Quote Originally Posted by David R.
    It looks like the Auto-Slot guy took the chip and tapped into the wires needed for the mod so you don't have to solder to the board then he shrink wrapped the chip for protection.

    http://www.autoslot.info/AS4.JPG

    I was going to try the Auto-Slot one, simply because I indifferent on the Credit mod and don't really want to solder the board since I seem to buy and sell my machines too often.

    What sort of time frame are you looking at Spooner?
    I received one of these today. For me, so far, it is a complete failure. Tried it in 5 machines of 3 different brands (Yamasa, Sammy and IGT.) Nothing works in any machine. Each brand fails
    in a different manner. I've e-mailed the seller. How he responds will determine whether I can recommend this product and vendor or not.

    update, as of 2/19, they have responded quickly and are working to make sure I get a good unit ASAP.

    update, as of 2/22 I have a new unit in an updated configuration. This unit is verified to work GREAT in my Pioneer, Yamasa, and Olympia machines. It does not work with my Sammy/Aristocrat, or my IGT machines. Vince has provided me with OUTSTANDING service.
    Chris W
    Mesa, AZ
    Spin-Luck , Dragon Dice , Super BlackJack, King Camel

  7. #27
    Fever Hunter spooner's Avatar
    Join Date
    Dec 2004
    Location
    Oblivion
    Posts
    233
    Thanks
    1
    Thanks Received
    41

    Default

    I don't know if it helps or not but I should have my plans for the no solder connection of the mod chip available within a week, and, I will even make the kit for you for my cost plus shipping when it is done.

    That is if there is still any interest in it. I already have it working in 3 machines, but I want to pair down the package to save on cost before I release it in the wild.

    Let me know if there is still interest. ~spooner

  8. #28
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    I'll take one, or more as long as it features the auto-credit mod.
    Meanwhile, somewhere in Oklahoma.

  9. #29
    Pachi Puro Lazarus's Avatar
    Join Date
    Nov 2004
    Location
    WI.
    Posts
    2,389
    Thanks
    188
    Thanks Received
    1,264

    Default

    Same here it has to have the auto credit mod!

  10. #30
    TANK's Avatar
    Join Date
    Jan 2005
    Location
    Pompano Beach Fl.
    Posts
    417
    Thanks
    0
    Thanks Received
    0

    Default !

    count me in !!

  11. #31
    mannytc
    Lurker mannytc's Avatar

    Default

    I'm good for at least one

  12. #32
    Sir Carl slotter's Avatar
    Join Date
    Dec 2004
    Posts
    7,742
    Thanks
    2,269
    Thanks Received
    2,424

    Default

    You're da man, spooner! I like it! :wink:

  13. #33
    Fever Hunter spooner's Avatar
    Join Date
    Dec 2004
    Location
    Oblivion
    Posts
    233
    Thanks
    1
    Thanks Received
    41

    Default

    Give me 4 or 5 days and I will be ready to bust out with it. Are most of you thinking of having me do the soldering on the kit (not on the slot) or are you thinking of doing it yourself? (Once again, no soldering will be required on the slot machine itself ... I promise :-) ) Oh, by the way. Is there any interest in the auto credit mod? :-?

    Just curious. ~spooner

  14. #34
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    I can handle the soldering myself. :-)

    I really don't think that anyone is interested in that auto-credit mod. Nope, we want that auto reel stop action. Can you also reprogram it to eliminate most of the music and lights? Oh and make it pay out all at once too! :-?
    Meanwhile, somewhere in Oklahoma.

  15. #35
    Pachi Puro Lazarus's Avatar
    Join Date
    Nov 2004
    Location
    WI.
    Posts
    2,389
    Thanks
    188
    Thanks Received
    1,264

    Default

    I can handle the soldering. I will say this one more time! If it does'nt have the credit mod there are other prodocts out there that do the same thing and I don't want thoughs ether! If I would have did this in capitals I would be screaming. :wink: I got up on the wrong side of the bed this morning.

  16. #36
    Sandwich Shooter cwstnsko's Avatar
    Join Date
    Nov 2004
    Location
    Mesa, AZ
    Posts
    496
    Thanks
    38
    Thanks Received
    90

    Default

    Quote Originally Posted by cwstnsko
    Quote Originally Posted by David R.
    It looks like the Auto-Slot guy took the chip and tapped into the wires needed for the mod so you don't have to solder to the board then he shrink wrapped the chip for protection.

    http://www.autoslot.info/AS4.JPG

    I was going to try the Auto-Slot one, simply because I indifferent on the Credit mod and don't really want to solder the board since I seem to buy and sell my machines too often.

    What sort of time frame are you looking at Spooner?
    I received one of these today. For me, so far, it is a complete failure. Tried it in 5 machines of 3 different brands (Yamasa, Sammy and IGT.) Nothing works in any machine. Each brand fails
    in a different manner. I've e-mailed the seller. How he responds will determine whether I can recommend this product and vendor or not.
    Just to follow up on the autoslot mod. The seller has responded very quickly in a positive way. I should have a new unit in the next day or two. He has offered me a full refund if this doesn't change the problem.

    update, as of 2/22 I have a new unit in an updated configuration. This unit is verified to work GREAT in my Pioneer, Yamasa, and Olympia machines. It does not work with my Sammy/Aristocrat, or my IGT machines. Vince has provided me with OUTSTANDING service.
    Chris W
    Mesa, AZ
    Spin-Luck , Dragon Dice , Super BlackJack, King Camel

  17. #37
    Sandwich Shooter cwstnsko's Avatar
    Join Date
    Nov 2004
    Location
    Mesa, AZ
    Posts
    496
    Thanks
    38
    Thanks Received
    90

    Default

    Quote Originally Posted by spooner
    I don't know if it helps or not but I should have my plans for the no solder connection of the mod chip available within a week, and, I will even make the kit for you for my cost plus shipping when it is done.

    That is if there is still any interest in it. I already have it working in 3 machines, but I want to pair down the package to save on cost before I release it in the wild.

    Let me know if there is still interest. ~spooner
    Spooner, which brands of machines have you tried this in? Have you tried it in a Yamasa machine yet? From my experience with the autoslot, the Yamasas seem to interact with the reel stop board in a different manner than my Sammys or IGTs
    Chris W
    Mesa, AZ
    Spin-Luck , Dragon Dice , Super BlackJack, King Camel

  18. #38
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default

    Spooner...
    I might be interested.
    AND YES... do the credit mod!!!
    Are you doing this on a custom PCB, making your own, or using a perf-board?
    Also, will you be using plugs or taps?
    logicprobe
    Retired - Living on a Wing and a prayer!

  19. #39
    ktressler
    Lurker ktressler's Avatar

    Default

    Spooner:
    Newbe here, I'm interested, but I'm one of those solder phobic people, I'd prefer something I can just plug and play.
    Thanks

  20. #40
    burtonk
    Lurker burtonk's Avatar

    Default

    For those of you who want to install without soldering, use microclips, cheap , easy to use and non altering.

    Having said this, I am still interested in your solution as well count me in on buying one.

Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Similar Threads

  1. pachislousa
    By lakata in forum Vendors & Manufacturers Pachislo
    Replies: 2
    Last Post: 05-07-2005, 04:25 PM
  2. PachisloUSA Autostop installation
    By cwstnsko in forum Pachislo Modifications
    Replies: 24
    Last Post: 03-20-2005, 10:15 PM
  3. Pachislousa
    By Lazarus in forum Vendors & Manufacturers Pachislo
    Replies: 9
    Last Post: 02-02-2005, 03:53 PM
  4. Thanks PachisloUSA
    By Czyotto in forum Vendors & Manufacturers Pachislo
    Replies: 2
    Last Post: 01-23-2005, 02:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •