Results 1 to 6 of 6

Thread: anyone used a rust converter on parts?

  1. #1
    Waste not, Want not mudfud's Avatar
    Join Date
    Nov 2008
    Location
    berkeley and salinas, CA
    Posts
    2,301
    Thanks
    1,954
    Thanks Received
    6,538

    Default anyone used a rust converter on parts?

    since I'm getting ready for the next restoration, I have been reading posts about dealing with rusty sheet metal parts.

    I wondered if anyone has tried coating the insides of parts with rust converter, to oxidize and seal with a plastic layer that prevents rusting.

    I remember using it on rusty parts on cars or motorcycles before painting, and thought it might help seal the insides of the troughs and tubes to keep the rust being dragged onto the cell minimized.

    I would only use it on the inside, where it wouldn't show, then maybe light oil or car wax on the outside to keep the rusting down.

    thoughts?
    PachiTalk

    chewy's motto: life is plumbing

  2. #2
    Eye Shooter digital1's Avatar
    Join Date
    Jan 2009
    Location
    OHIO
    Posts
    586
    Thanks
    969
    Thanks Received
    1,073

    Default Re: anyone used a rust converter on parts?

    I have never heard of that product but if you can get the rust off and put a protectant in its place ( one that won't chip) it sounds great.

    I still like the aluminum foil and water to remove rust.
    --

  3. The following 3 users say "Thanks" to digital1


  4. #3
    Fever Hunter SphereJunkie's Avatar
    Join Date
    Nov 2008
    Location
    Oklahoma City, Ok
    Posts
    192
    Thanks
    1,397
    Thanks Received
    587

    Default Re: anyone used a rust converter on parts?

    Whoa!!! Aluminum foil and water to remove rust!!! Seriously!! I need to try that when the time comes.
    _____________________________________________
    Tony, Sr. "T" CR Fever Star Wars Darth Vader, CR Super Sea Story
    Getting my pachinko fix one sphere at a time

  5. The following 2 users say "Thanks" to SphereJunkie


  6. #4
    Pachi Puro emmadog's Avatar
    Join Date
    Jan 2009
    Location
    U.S.
    Posts
    2,860
    Thanks
    967
    Thanks Received
    7,183

    Default Re: anyone used a rust converter on parts?

    That's a great idea, Mudfud. I had thought about using a converter product on parts like the rods and various arms on the back of the machine. I could buy a tumbler and clean the parts but they would still need to be protected especially here in the humid South. The rust converter eliminates the need for having to remove the rust while stopping future corrosion.
    I had never thought of using it for inner parts that the balls come into contact with. I'll have to add this to my other "when I can get around to it" projects.

  7. The following user says "Thanks" to emmadog


  8. #5
    Tokie Owens 1930artdeco's Avatar
    Join Date
    Jul 2009
    Location
    Oakland, ca
    Posts
    17
    Thanks
    0
    Thanks Received
    18

    Default Re: anyone used a rust converter on parts?

    Hi Mudfud,

    The rust converter will work on the metal but I think you are right, you will have to use a wax or shoot it with clear coat. The clear coat might be preferable so as not create a waxy build up and you won't have to keep reapplying it.

    p.s. I will get in touch with you soon about cleaning up my machine.


    Mike

  9. The following user says "Thanks" to 1930artdeco


  10. #6
    Waste not, Want not mudfud's Avatar
    Join Date
    Nov 2008
    Location
    berkeley and salinas, CA
    Posts
    2,301
    Thanks
    1,954
    Thanks Received
    6,538

    Default Re: anyone used a rust converter on parts?

    thanks for feedback.

    since we have the internet these days, I am always researching new ways to do things.

    I will try derusting with jeff's techniques, wire brush and steel wool on others, then try converter on a small area that won't show (maybe inside some low tube), just to see.

    I agree that waxes or oils, the usual iron protectants, would not be a good idea in any ball contact area.

    guess that's why they went to plastics in most areas: easy to premold, fun colors, and no rust!
    PachiTalk

    chewy's motto: life is plumbing

  11. The following 3 users say "Thanks" to mudfud


Similar Threads

  1. Where is this rust coming from?
    By chmer01 in forum Ball Lifters/Ball Management
    Replies: 2
    Last Post: 05-26-2009, 09:29 PM
  2. Weird Converter
    By Sid in forum These are the days of our lives...
    Replies: 3
    Last Post: 01-09-2008, 10:23 AM
  3. rust buckets
    By birdbrain in forum eBay - General Auction listings
    Replies: 6
    Last Post: 01-01-2007, 01:44 PM
  4. converter trouble continued
    By proffesorpeter in forum Pachislo Modifications
    Replies: 2
    Last Post: 08-17-2005, 06:34 AM
  5. converter trouble
    By proffesorpeter in forum Pachislo Modifications
    Replies: 8
    Last Post: 08-16-2005, 10:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •