ELVIRA PINBALL - If you have one, PLEASE HELP!!!

[rubberratt]

I hope you got that machine for free !!!

Great improvement indeed. When I am restoring playfields... I try like hell NOT to remove mylar protection.

I also remove the clear inserts when using decals, and then THIN layer of epoxy on top.

Enjoy your MUCH BETTER LOOKING elvira

[kkentert]

To say your not an artist you've done a really nice job. Well done.

The insert with the flames round it on the second pic looks really raised to me. You might want to make it level again. Do do this you need to heat up the insert from underneath, try with a hair dryer but you might need a heat gun to soften the glue around the insert so it can be pushed back in place.

I'll check it out, but I think it may look more raised in the pic than it is. Also, the paint is pretty thick in some areas, and it could be the raised paint you see. But I will check it out for sure. Thanks!
______________________________________________________

I hope you got that machine for free !!!

Great improvement indeed. When I am restoring playfields... I try like hell NOT to remove mylar protection.

I also remove the clear inserts when using decals, and then THIN layer of epoxy on top.

Enjoy your MUCH BETTER LOOKING elvira

Actually, I paid way too much for it. :-(