What are these?

**JamesM** · 02-03-2005, 05:17 AM

Is this the volume switch?

Do these knobs(there are three) unlock the glass from the playfield?

This pink thing flops around unless it's locked on the tab.
It appears to not be attached to anything.

What does this adjust?

**Bilko44** · 02-03-2005, 10:19 AM

The top photo is the volume switch--should be three position.

The next photo shows plastic latch--there are several that attach misc electronic assembly boards to the playfield board. This makes it easier to assemble and replace components.

The others, I don't know.

**JamesM** · 02-03-2005, 10:23 AM

thanks

**luckydog** · 02-03-2005, 10:24 AM

if the switch is 3 position then it should be the volume,

the tabs to open the door or entire machine should be metal.

facing the back of the machine they will be on the left-right next to the frame,

the metal tab at the middle opens the door. the top and bottom ones open the frame.

i don't know what the bottom picture control does.

**Firewire** · 02-03-2005, 10:28 AM

I've too wondered what the black dial on the bottom does. I messed with it a little and I didn't notice anything.

**JamesM** · 02-03-2005, 11:40 AM

I called tech support this morning.
It turns out the gate valve on mine is locked & unlocked through a tiny hole in the front using a paperclip.

So that's where it is

Now if only I had a paperclip

**Firewire** · 02-03-2005, 11:59 AM

You can trace it on the back side. It is a white lever looking thing. A small screwdriver from the back can actuate it as well.

The paperclip pushes a pin which in turn pushes the white lever. If you open it up or look at the back you can see it.

**JamesM** · 02-03-2005, 01:00 PM

I just discovered that :-) everything works now except the ball lifter's switch cord is too short.

I played with the game for the first time. Way too few balls.
I didn't know to ask for the pachitalk member extra balls bonus.
Me wants my 1000 ball order grunt grunt grunt