Auto-Stop for New Pulsar Extra

[Yoeddy1]

Hi all,

I'm new here and I've been reading about the Auto-Stop mods. I bought a New Pulsar Extra ( PachiTalk Research Center - Yamasa / Niigata - New Pulsar - PachiTalk ) and I was hoping to find out what is involved with this type of modification and if it is possible on this particular model.

Any help would be appreciated. Thanks!

[autoslot]

Browse my site at PachiTalk Members
If the machine has a 30 pin connector on the stop/interface board, my standard unit will work. You need a little electrical smarts to use the credit-add models. Many newer machines have gone away from the traditional stop board. If yours is one of these, I probably can't help you.
Vince

[Yoeddy1]

Attached is an image of the board in my machine...is it compatible with the auto-stop chip?

[autoslot]

That is actually from an older "vintage" machine. The standard model will not work. See this link about the DIY AUTOSLOT Do It Yourself Kit
It might work, you still have to run wires to the sprin knob and coin sensors if you want too try the credit add.