Results 1 to 13 of 13

Thread: Hanabi Hyakki reel light replacement

  1. #1
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Hanabi Hyakki reel light replacement

    Started this new thread for anyone with bad LED reel lights in their Eleco pachislo machine. I know it's been covered, but what can I say?

    For more info, you can read up here => http://www.pachitalk.com/forums/pach...ds-faulty.html and follow the links.

    LED's obtained from => Discrete LEDs - Quickar Electronics Inc

    9 items from the bottom of the page are Piranha white LED's. You need 18 of them per machine (6 per reel). The item # is whpir (White Piranha 1200 mcd Typical @ 100 degree 20ma). Currently $.95 ea.

    Additional Items you will need. (based on what I used, your milage may vary). From Radio Shack.
    - 30w soldering iron kit (incl. iron, stand, solder, solder tool, and heat sink)
    - *optional* solder stand w/ sponge (makes things much easier than chasing your iron around)
    - desoldering braid

    Also need a pair of wire snips to clip off resistors. And isopropyl alcohol to clean the residue off the circuit board after desoldering.

    This is an easy project provided you have steady hands. This was my first time desoldering, and I had no trouble. Elapsed time approx. 1 hr.

    Disassemble your reels and take the circuit board out. I did mine one at a time, and marked the orientation of the reel motor to the housing with a sharpie.

    Before starting the desoldering process, cut off resistors R2, R4, & R6 with the snips.

    To remove the old LED's, spool out a length of the desoldering braid, and place it on the LED prong to be desoldered , heat up the braid, and the solder with the iron. The braid will wick up the hot solder leaving a solder free joint. After all 6 legs of the original LED are solder free, use the solder tool (from the kit), and pry the LED off the board. Don't force it!!! If it appears to be stuck, recheck for any solder you missed and try again. You can also snip off the LED legs and dsolder them , but I found it easier to desolder the 6 legs and pry the whole thing out.

    Before installing the new LED's, clean the residue off the board with the alcohol.

    Install the new LED's as oriented in the pictures, and solder them in.

    Install the circuit board in the reel assembly, and re-install the reel.

    Enjoy playing your newly repaired pachi with the satisfaction you fixed it yourself!

    Pictures to follow...
    Gotta catch 'em all Pa-chink-o

  2. The following 12 users say "Thanks" to Ikaria


  3. #2
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Hanabi Hyakki reel light replacement

    Pictures...

    1. My reels prior to LED replacement

    2. Reel and bracket removed, motor and bracket marked.

    3. Circuit board and shroud removed from reel bracket.

    4. LED side of circuit board.

    5. Resistor side of circuit board.
    Attached Images Attached Images
    Gotta catch 'em all Pa-chink-o

  4. The following 7 users say "Thanks" to Ikaria


  5. #3
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Hanabi Hyakki reel light replacement

    More...

    6. LED side with LED's removed.

    7. Resistor side with resistors and LED's removed.

    8. LED side with LED's installed

    9. Resistor side with LED's installed

    10. Reels with new LED's installed

    11. Hanabi Hyakki ready for action!
    Attached Images Attached Images
    Gotta catch 'em all Pa-chink-o

  6. The following 13 users say "Thanks" to Ikaria


  7. #4
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Hanabi Hyakki reel light replacement

    Well I am just getting started with mine. Pulled reels & about to start prep, so that when the LED arrive, I can just install & reassemble.
    Thanks for the pictures.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  8. #5
    The Diceman Chrisdice's Avatar
    Join Date
    Sep 2005
    Location
    Seaford, Delaware, United States
    Posts
    3,358
    Thanks
    1,973
    Thanks Received
    3,979

    Default Re: Hanabi Hyakki reel light replacement

    did you get that one on craigs list i showed you??
    Chris Dice
    Yo 11 any 7

  9. #6
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Hanabi Hyakki reel light replacement

    Yes, that is the one I am fixing. about 1/2 the LEDs are going on it, so I figured that I should just replace them all. I could not get the price down. But $125 for a full screen is not to bad. Plus I was down that way picking up a couple of others.
    I got a Fuji Arraking that is going to need bulbs but that one is a lot harder. Not LED & bulbs are soldered in.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  10. #7
    The Diceman Chrisdice's Avatar
    Join Date
    Sep 2005
    Location
    Seaford, Delaware, United States
    Posts
    3,358
    Thanks
    1,973
    Thanks Received
    3,979

    Default Re: Hanabi Hyakki reel light replacement

    cool.$125 was a good deal. let me know how that game plays. I heard good things about it.
    Chris Dice
    Yo 11 any 7

  11. #8
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: Hanabi Hyakki reel light replacement

    Will do.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  12. #9
    SNORTARRIFIC! new in town's Avatar
    Join Date
    May 2007
    Location
    Jacksonville Florida
    Posts
    5,925
    Thanks
    12,836
    Thanks Received
    11,417

    Thumbs up Re: Hanabi Hyakki reel light replacement

    Good Job Dwight ! Congrats !

    Oh By The Way.

    Spoiler
    72 Pachi's, 36 Pachinko's, 2 Pallots, 3 Pinn's & 2 Pachinko Bar Signs. Links to About Me: pachijunkie's Videos


  13. The following user says "Thanks" to new in town


  14. #10
    Fever Hunter maury's Avatar
    Join Date
    Feb 2005
    Location
    Missouri, USA
    Posts
    225
    Thanks
    57
    Thanks Received
    236

    Default Re: Hanabi Hyakki reel light replacement

    I have no skills with this stuff. I've lost almost a whole reel now, the first one has a full set of working lights and the last one is missing the middle ones.

    Eventually I'll have to learn how to do this...Just not looking forward to it!
    "Listen, our practice will be different today. I want you to forget that I'm your master and use all that I taught you."

  15. #11
    Blind Shooter Mudplugger's Avatar
    Join Date
    Nov 2009
    Posts
    65
    Thanks
    15
    Thanks Received
    149

    Default Re: Hanabi Hyakki reel light replacement

    on ebay they have these.
    100 pcs 5mm Piranha LED Super Flux wide angle White on eBay (end time 10-Mar-10 02:12:44 GMT)
    The forward voltage seems wrong though.My Sinbad Adventure.Seem to have RGB led in.I think they are as the LED has not gone out but has a geen tint and if I look at the other leds close i can see the RGB colours coming from the LEDS. I Are the white ones the same as RGB for replacement method above?

  16. #12
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,711
    Thanks
    2,281
    Thanks Received
    4,976

    Default Re: Hanabi Hyakki reel light replacement

    The reel lights on the Sinbad Adventures machine, I picked up last week, were a little dim and discolored. So I started looking for info on replacing them and found this thread. I also found a 6 page thread on the same topic. After reading it it was a little confusing on what to do and which light to use.

    So I'd just like to thank Ikaria for this thread.

    His information is straight forward and the pictures are great to refer to. I could refer to the pictures to make sure I installed the new led's correctly, as far as getting the positive and negative sides right.

    The link to the replacement led's is still active and the owner, Mark, is great to deal with. I received them two days after I ordered them.

    It was really a pretty easy "do it yourself" project.

    "THANK YOU, IKARIA"!!!

    Here's the end result.

    Sinbad reel lights 002.jpg
    What if...​the ​HOKEY POKEY, is what it's all about?

  17. The following 5 users say "Thanks" to Wayne-Ooo


  18. #13
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Hanabi Hyakki reel light replacement

    I can't edit my original post, but the new link for the LED's should be => https://www.moreleds.com/superflux.htm
    Gotta catch 'em all Pa-chink-o

  19. The following 3 users say "Thanks" to Ikaria


Similar Threads

  1. Azteca: The Legend Returns Light Replacement
    By wukongxiang in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 05-28-2011, 07:12 PM
  2. Light Bulb replacement...
    By nicko6113 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 07-24-2009, 11:52 PM
  3. Cranky Condor - Reel Light replacement
    By Hinckley_Buzzard in forum Pachislo Modifications
    Replies: 4
    Last Post: 01-31-2006, 08:11 PM
  4. replacement light bulbs
    By steam furnace in forum Vendors & Manufacturers Pachislo
    Replies: 8
    Last Post: 10-02-2005, 07:21 PM
  5. pachinko replacement light bulbs
    By ukidude in forum Pachinko Modifications
    Replies: 1
    Last Post: 03-28-2005, 10:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •