Computer Pachinko - Coin Op Vintage Machine

[thepachinkoman]

I have seen a couple of these online before but never new much about them. Purchased one from a guy this weekend. He ran a bar in the 70s and had 2 of them in there. (he sold the other years ago).

I posted a lot of pictures on this page quickly, more pictures when I get around to restoring the machine. Computer Pachinko Machine - Jaws Sharks.

It works mostly but needs a part replaced on a circuit board. The tilt was dissabled in the bar because it was very sensitive and patrons got upset. When he brought it home he bypassed the coin mechanism with the small red push button in the bottom of the machine.

The top half attaches to the stand with 4 wingnuts, so it could be easily mounted on a table. If anyone has any more info on these machines I would greatly appreciate it.

here are a couple threads from the past
Coin-Op Vintage Pachinko
Vintage

[MrGneiss]

Cool sharks!!

Here's a thread with some great pics..

Computer Pachinko Machines and Flyer

And while his is different, here's Eddies great thread on his Coin Op pachi..with tilt stuff and circuit board stuff..it may be different but it still might help!?

Coin Op Pachinko has arrived!!!!!!!!!!!

[Moparformances]

i have see pictures of these forsale over the years but i have never see on in person..

nice find

a true cross over from Pachinko to Arepachi nice find Bill, good luck on your quest for parts

[Eddie]

Great machine I have always thought of getting that model

Here is a link that has 3 vids about my machine 2 Vids I made and one vid Fronzdan made explaining what he did to repair the board.

YouTube - coin op pachinko


Fronzdan a member here is the Board expert that repaired my machines board.

You need to take the board cover off and take pics of your board.

I have had custom chip holders made so that modern chips can be used to replace the old obsolete chips. Some members here wanted some but they have not yet arrived although they are finally complete. I should be getting them within the next 2 weeks if not sooner.