Results 1 to 8 of 8

Thread: no sound no video

  1. #1
    Tokie Owens les_888's Avatar
    Join Date
    May 2009
    Location
    stafford uk
    Posts
    5
    Thanks
    4
    Thanks Received
    4

    Default no sound no video

    hi im in the uk. i purchashed a onimusha machine and incorrectly plugged it in to a 110 ac transformer I now know it should have been 24ac. I purchased a new power supply and a 24ac transformer, when i connected everything the reels spin it takes coins and credits, however there is no sound and no video ,when it first starts up, it says NO SYNC on the screen for a few seconds. Any ideas , have i blown something else?

    thanks

  2. #2
    Pachi Puro FTKServices's Avatar
    Join Date
    Aug 2006
    Location
    Finally in Tennessee
    Posts
    2,159
    Thanks
    2,955
    Thanks Received
    1,419

    Default Re: no sound no video

    Yes i have dont the same thing on a baseball boy. The sound board on my was blown also. Follow the spaeker wires back.
    Hope this helps.
    SPIN LUCK #2973 *** KING CAMEL *** SINBAD ADVENTURE *** AUTOMATIC *** WILD WOLF *** DEATH VALLEY *** NEO PLANETT *** THE CYBORG SOLDIER 009 SP *** DESTROYER

  3. #3
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,340
    Thanks
    51,525
    Thanks Received
    30,715

    Default Re: no sound no video

    Did you manage to trace the fault and get it fixed les_888??

    and Welcome to PachiTalk

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  4. #4
    Tokie Owens les_888's Avatar
    Join Date
    May 2009
    Location
    stafford uk
    Posts
    5
    Thanks
    4
    Thanks Received
    4

    Default Re: no sound no video

    Thanks for the welcome, still haven't managed to get it fixed. Took out the two control boards sent them off to supplier who checked them, he said they were ok and he was recording NO SYNC. Think it must be the actual screen.

  5. #5
    Crippenese spoken here. drcrippen324's Avatar
    Join Date
    Dec 2005
    Location
    some where oop north
    Posts
    5,184
    Thanks
    3,740
    Thanks Received
    5,083

    Default Re: no sound no video

    if the screen says no synk then it is running fine if you had blown any part of the screen driver ect it would have carried on down the line the back light might work but wouldent have any message ect as its part of the driver bord that produces this message so money is still on the video bord not the screen or driver
    My rice krispies told me to do it



    please note pachitalk.com cannot be held responsible for any injuries or death that occur as a results of anything strange people like me suggest you do

  6. #6
    Tokie Owens les_888's Avatar
    Join Date
    May 2009
    Location
    stafford uk
    Posts
    5
    Thanks
    4
    Thanks Received
    4

    Default Re: no sound no video

    Your probably right. Having just purchased popeye, i notice that the boards are identical to onimusha. To check the videoboard on the onimusha myself can I put it into the popeye machine . i dont wish to break anything on the popeye machine though.

  7. #7
    Crippenese spoken here. drcrippen324's Avatar
    Join Date
    Dec 2005
    Location
    some where oop north
    Posts
    5,184
    Thanks
    3,740
    Thanks Received
    5,083

    Default Re: no sound no video

    if im correct then yes they should just swap out you will end up with some real strange sounds ie not maching the reels or the animation on screen but will give you an idea as to weather it is the screen or the bord
    My rice krispies told me to do it



    please note pachitalk.com cannot be held responsible for any injuries or death that occur as a results of anything strange people like me suggest you do

  8. The following user says "Thanks" to drcrippen324


  9. #8
    Tokie Owens les_888's Avatar
    Join Date
    May 2009
    Location
    stafford uk
    Posts
    5
    Thanks
    4
    Thanks Received
    4

    Default Re: no sound no video

    Put the onimusha video board in the popeye machine screen still says No sync. Then put the popeye videoboard in the onimusha machine thinking it would work albiet with strange sounds - but no, screen says No Sync. Can only think it must be the video board and something else wrong with onimusha. Gonna scrap it i think.

Similar Threads

  1. No sound from sound board
    By st1300 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 07-13-2011, 06:01 PM
  2. Yamasa Q Logos, Video/Sound keeps resetting
    By Rraganft in forum Pachislo Technical Support Tickets
    Replies: 8
    Last Post: 03-16-2011, 02:11 PM
  3. No Sound?
    By theprall44 in forum Pachislo Technical Support Tickets
    Replies: 7
    Last Post: 03-07-2010, 09:16 PM
  4. What you sound like.
    By digital1 in forum Dear Arby
    Replies: 32
    Last Post: 02-10-2009, 10:33 AM
  5. Azteca Legend Video Sound
    By 10X in forum Model Talk
    Replies: 4
    Last Post: 02-10-2005, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •