My Machine will not operate

[Mr. Mojo Rising]

I will attach the pictures and videos of my problem. I have another thread in Model Talk and we have not been able to resolve it. The machine will not reset or operate. Please watch the videos for explanation.

Thanks for any help I am at my wits end.

Joe

[alstonj1]

instead of hitting the spin lever 3 times hold the lever down while turning the reset key back. or you may have a bad spin lever (there should be a board inside the machine that has some leds on it look at that board while pushing the knob an led should be turning on and off while you move it ) . also look at the small board on the side or back wall of the machine should be roughly 3x5" with a fuse on it .thats your reel stop board it controls your spin lever and stop buttons if that fuse is blown the stop buttons and spin lever wont work .also if one of the other buttons is stuck on the spin knob wont work either (clean them all with windex on a paper towel .push them in then clean around the inside of the pushbutton ) if one is stuck on its led should be on all the time on the board inside .good luck and let us know how your doing

[Mr. Mojo Rising]

Thanks for the help. I ended up unplugging all of the internal connections and reconnecting them. I cleaned it out with a air spray can. I turned it on and it worked fine!