Frozen Nights Error Codes

[pinballwiz]

Hello,

I just purchased a Frozen Nights pachislo machine. I have a few 'real' slot machines, and just added this to the collection.

Does someone have a list of error codes and what they mean? When powered on, this one just plays music and gives a C E or C L code.

Any help is appreciated!!

Thanks,
Rob

[Chrisdice]

real slot machine?

[pinballwiz]

real slot machine?

Ok, maybe I should say 'Vegas' style slots. Anyway, can someone help?

Rob

[luckydog]

Frozen Nights Pachislo Machine - Pachislo - Full Machines - Arcade Video Game Coinop Sales - Coinopexpress

[Chrisdice]

Frozen Nights Pachislo Machine - Pachislo - Full Machines - Arcade Video Game Coinop Sales - Coinopexpress

price is right.

[hanabi]

Hello,

Although I am not familiar with your model of Pachislo, I do believe that CE error codes are something to do with either the Coin Acceptor or the Hopper areas of the machine

You could try emptying the Hopper of Tokens and checking for any that are causing a blockage, also giving the Hopper and Coin Acceptor parts a good clean might help also

Hopefully a more knowledgeable member can offer further advice to you

[pinballwiz]

Hello,

Although I am not familiar with your model of Pachislo, I do believe that CE error codes are something to do with either the Coin Acceptor or the Hopper areas of the machine

You could try emptying the Hopper of Tokens and checking for any that are causing a blockage, also giving the Hopper and Coin Acceptor parts a good clean might help also

Hopefully a more knowledgeable member can offer further advice to you

It did have something to do with the coin acceptor. The thin metal rail that the tokens ride down is rusted, and not always allowing the token to roll down smoothly.

Any tips on removing the rust?

Thanks,
Rob

[FTKServices]

Glad to see you solved the trouble.

[alstonj1]

steel wool works nicely but for something small like this id just scrape the rust off and blow it clean . glad to see you have the machine running .

[hanabi]

Glad to hear you found the cause of the problem,

I've never had to remove rust from a Pachi before, but I would think gentle sanding should do the trick and being very careful not to get any of the dust into the workings or any place the tokens need to travel

[Chrisdice]

a nail file might do the trick

[luckydog]

the cardboard ladies fingernail files sre good for that to. I've used them to sand down rough edges in the token slots.

[FTKServices]

If the parts come off then it is a wire wheel i use, if not then the nail file works great.