Results 1 to 7 of 7

Thread: Lights for a 'vintage' pachinko?

  1. #1
    Blind Shooter pachinkojohn's Avatar
    Join Date
    Dec 2004
    Location
    Houston, Texas
    Posts
    54
    Thanks
    4
    Thanks Received
    15

    Default Lights for a 'vintage' pachinko?

    I've got one light out on my awesomely fun Nishigin 'Rhapsody' that I bought from Logicprobe (thanks Logic!). It's one of the flashing lights surrounding the playing field, and there are quite a few of them in different areas, all seem to use the same mount. It's a white holder with a small longish pea/Christmas tree size light bulb about 1/2" long, and the whole assembly about one inch long. The holder is attached to a small circuit board with several other lights. I haven't taken the cover off yet as there don't seem to be any screws on initial observation, but it does look like a plug-in bulb. (fingers crossed)

    Since this is a 'newer' machine than the old flipper styles that could get by with only a flashlight bulb, I was wondering if anyone here had tried to replace any bulbs like this, or may have a dead machine that possibly similar lights bulbs could be pulled out of, or know of a source of light bulbs.

    You can't really tell it's out unless you look hard, but I'd like to restore this machine as much as possible.

    Thanks for any info!!

    John

  2. #2
    Blind Shooter pachinkojohn's Avatar
    Join Date
    Dec 2004
    Location
    Houston, Texas
    Posts
    54
    Thanks
    4
    Thanks Received
    15

    Default

    Whoops, sorry, this should have gone over to mod and tech issues.

    My bad.

    John

  3. #3
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    are what you looking for are ether of these lights ?
    https://host65.ipowerweb.com/~pachis...es&user1=1
    "This is My Personal Opinion and no others"

  4. #4
    Blind Shooter pachinkojohn's Avatar
    Join Date
    Dec 2004
    Location
    Houston, Texas
    Posts
    54
    Thanks
    4
    Thanks Received
    15

    Default

    Thanks for the link Arby. Unfortunately no they aren't the same, these have bases already attached. The base has two tiny holes in it that slide over two pins sticking out of the circuit board bent in an sideways 'L' shape
    ____ < - bulb slides over these two pins
    ___|________

    I just found this link, they evidently still make the same bulb/socket for new machines, it's the bulbs all around the sides on the small circuit boards.

    http://imagehost.vendio.com/bin/view...idpay&sp=1

    So maybe one of the vendors might have some. I'll check there next, then try to find someone with a dead machine that I could buy the boards and bulbs from.

    Thanks!

    John[/img]

  5. #5
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    Try
    AMERICAN SYSCOM, INC.
    3433 W. El Segundo Blvd.Hawthorne, CA 90250
    www.pachinko-slot.com
    E-mail: info@pachinko-slot.com
    Phone: 310-263-0448; Fax: 310-263-0458
    Hotline: 1.888.263.0440 (toll-free within North America)
    Technical Support E-mail: support@pachinko-slot.com
    "This is My Personal Opinion and no others"

  6. #6
    Blind Shooter pachinkojohn's Avatar
    Join Date
    Dec 2004
    Location
    Houston, Texas
    Posts
    54
    Thanks
    4
    Thanks Received
    15

    Default

    Thanks again Arby, but they don't have bulbs either. (?) Maybe they just don't want the hassle of stocking stuff. Though one would think someone would have a light go out in warranty!

    I've got more e-mails in to other vendors, let's see what happens.

    If anyone has a dead machine that has these types of lights, I'll pay well for the lights, their respective circuit boards, and wires in it.

    John

  7. #7
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    Here all my contacts

    Maybe someone can help

    Slot Liquidators, Ltd. 3826 Roundbottom Road Suite F Cincinnati, OH 45244
    800-557-1724 M-F 10am-4pm.
    sales@SlotLiquidators.com
    http://www.slotliquidators.com/

    Milt Cohen
    c/o Stealth Home Amusement
    98 College Ave
    Rochester, NY 14607
    888-798-1761 (Toll-Free), 585-271-3844 (Office), (demos@rochester.rr.com) E-mail
    www.stealthhomeamusement.com, www.planethollyweb.com

    Hopson Enterprises
    2501 S Stockton Street Suite C
    Lodi, CA 95240
    (209) 367-3863; Sales Ext 101; Tech Support Ext 103
    www.valleygaming.com,
    valleygaming (hopsonent@earthlink.net)

    Seven mile slots.com
    P.O. Box 496
    Greendale WI, 53129
    Telephone: 414-915-2097
    General Information questions@7mileslots.com
    Sales Department sales@7mileslots.com
    Dave Sherry davesherry@7mileslots.com

    Pachislo USA Japanese Slot Machines;
    www.pachislousa.com
    Pachislo (pachislo@pachislousa.com)
    Robert

    Direct Gaming International
    coin-op@pacbell.net; pachislot777 (mail@skillstop.com)
    (714) 441-2739, tech support line at 714-441-0806
    2116 E. Walnut Avenue, Suite B
    Fullerton, California, 92831

    AMERICAN SYSCOM, INC.
    3433 W. El Segundo Blvd.Hawthorne, CA 90250
    www.pachinko-slot.com
    E-mail: info@pachinko-slot.com
    Phone: 310-263-0448; Fax: 310-263-0458
    Hotline: 1.888.263.0440 (toll-free within North America)
    Technical Support E-mail: support@pachinko-slot.com

    SlotUSA.com; Joe
    http://SlotUSA.com
    slotusa (sales@slotusa.com)
    866-Slot-USA / 866-756-8872 - Sales* Service* Direct Importer

    Texas Auction
    texasauction (lawrinca@aol.com)
    Curt Hayes
    Call Carl at the Tech Center 214 361-7123.
    The tech Center is open 9-5 Mon-Fri and 9-Noon on Saturday, CT.
    "This is My Personal Opinion and no others"

Similar Threads

  1. battery for vintage pachinko lights
    By kerri369 in forum Vintage Pachinko
    Replies: 5
    Last Post: 02-06-2011, 04:11 PM
  2. Need a bay window lights mount with lights and circut
    By neonbrad in forum Pachinko Technical Support Tickets
    Replies: 1
    Last Post: 03-03-2010, 05:43 AM
  3. some lights out top gun pachinko
    By victor in forum Modern Pachinko
    Replies: 2
    Last Post: 09-19-2009, 11:21 PM
  4. Ward of Lights Pachislo - lights up but nothing happens??
    By MichelleD1104 in forum Pachislo Technical Support Tickets
    Replies: 10
    Last Post: 08-10-2009, 10:12 AM
  5. Hook up for vintage lights
    By H20Dreams in forum Vintage Pachinko
    Replies: 5
    Last Post: 08-17-2006, 01:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •