Results 1 to 13 of 13

Thread: kung-fu retsuden problem

  1. #1
    crimsonb
    Lurker crimsonb's Avatar

    Default kung-fu retsuden problem

    I have had this machine for a few days and I hit the bonus payoff and after a few minutes of running the machine quit. I checked the fuse and it isnt blown. Any ideas? The transformer was very hot to the touch.

  2. #2
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    Transformers will get hot to the touch when it's working properly. It just stopped? Does it have lights or anything?
    Meanwhile, somewhere in Oklahoma.

  3. #3
    crimsonb
    Lurker crimsonb's Avatar

    Default

    No lights no sound, nothing. While paing off the machine just quit. I thought the fuse might have blown but it looks fine.

  4. #4
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    Have you tried resetting the machine? Kill power to it, remove the plug from the wall. Then apply power again, turn the reset key on, then power the unit back up, turn the reset key back off and see what it does.
    Meanwhile, somewhere in Oklahoma.

  5. #5
    crimsonb
    Lurker crimsonb's Avatar

    Default

    Tried resetting it and still no luck. It acts like a fuse is blown. Hopper wont spin when the button is pressed nothing. Is there another fuse somewhere that I dont know about?

  6. #6
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default

    I'm sure there must be one inside the power supply. If it is doing absolutely nothing, I would look there. The power supply is what the transformer is plugged into.
    Meanwhile, somewhere in Oklahoma.

  7. #7
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default

    you could have a faulty cord.

    or loose connection from cord to transformer or transformer to power supply.

    the wires are usually connected with regular wire connectors,

    you could try loosening them and retighten.
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  8. #8
    crimsonb
    Lurker crimsonb's Avatar

    Default

    There is a fuse that i can unscrew that is beside the on / off switch and it is not blown. I didnt know if there might be one inside the power supply.

  9. #9
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default

    make sure you pull the plug first!!!!!!!!!
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  10. #10
    crimsonb
    Lurker crimsonb's Avatar

    Default

    Guess I will take it back to the guy a got it from. I replaced the fuse on the outside of the power supply just in case and dont think theres one on the inside.

  11. #11
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    Do you have it plugged into a power strip? They usually have a circuit breaker or fuse on them you might want to check. And also by chance did you check the house circuit breaker or fuse? You might have overloaded the circuit and blown one of them.

  12. #12
    crimsonb
    Lurker crimsonb's Avatar

    Default

    Its plugged into the wall. I checked my breaker box and also plugged a lamp into the outlet to make sure it was working.

  13. #13
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    some power supplies have a over heating reset button, might check that also.
    "This is My Personal Opinion and no others"

Similar Threads

  1. Kung-fu gal fever!
    By individualist in forum Modern Pachinko
    Replies: 1
    Last Post: 06-29-2009, 02:23 AM
  2. Kung Fu Lady LED fix
    By scottz29 in forum Pachislo Modifications
    Replies: 10
    Last Post: 04-03-2009, 10:03 AM
  3. Fever Kung Fu Gal
    By individualist in forum Modern Pachinko
    Replies: 6
    Last Post: 12-25-2005, 07:56 PM
  4. Kung Fu Retsuden
    By delphicoder in forum Model Talk
    Replies: 8
    Last Post: 01-13-2005, 11:19 PM
  5. Kung Fu Lady II?
    By delphicoder in forum Model Talk
    Replies: 15
    Last Post: 01-11-2005, 03:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •