HELP ME for code error CR

[fabio]

Hi, sorry for my english... I speak Italien

I hawe 1 machine pachislo SIMBAD ADVENTURES
and last week when hawe start ON the machine
exit this : ERROR CODE CR
and machine now not work

is possible reset the machine ?

can we help me, and if is possible reset the machine write
step to step this operation ?

tanks for help

Fabio

[luckydog]

the answer is here

PachiTalk

welcome to Pachitalk

[fabio]

hello, Lucky Dog tanks for your respose

I have look the message and I have test this procedure...

the machine enter in setup mode and is possible change the number on the display 1-2-3-4-5-6 with the botton on the door
but when exit with the key of setup the machine have this error too...

the error code on display is CR and exit a message japainese for me incomprensible ...

help me please

tanks
Fabio

[birdbrain]

clean your hopper and check for a coin jam.

[fabio]

Hi, tanks for your respose Birdbrain

I have thinks too at hopper and coin jam and ave control...

I have clean the hopper and coin jam and have control the connection
and for me is all correct...

I don't no were can is the problem...

but not exist a procedire for reset machine of setup factory ?

last procedure with botton on the door 1-2-3-4-5-6 not is for regolate
the % of winner ? not is this a reset of machine ... (I thinks..)


you have other idea ?

tanks
Fabio

[luckydog]

the procedure sets your odds and also hard resets your machine,

[fabio]

hi, sorry Luckydogs not is clare, I'm not have understund

can you tell me with other example ?

excuse my English but be very limited...

[luckydog]

open machine
shut off power
reset key is on the upper right of the machine, turn it on
turn on the pachislo
reset button is on door right below screen, next to the two switches, press the button to the level you want
push down joystick
leave the machine turned on
turn off reset key

this should reset you machine
l

[fabio]

hi, tanks for respose

I hawe read this procedure and have tested this
but when exit with the key, the error exist too...

I have control the coin jam and have clear with alcool

... I dont' no...

now I have look in other post a manual pdf and hawe download..
tomorrow I searc to read...
but the problem is error, beacuse in the manual pdf I look this error
E-0 (CE/ CJ)
E-1 (HE/ HJ)
E-2 (HE/ HJ)
E-3 (HE/ HJ)
E-4 RR
E-5
E-6 CO
E-7
E-8
CE-CJ-C2

and in my Simbad machine error code is CR on display

tanks
Fabio

[fabio]

Hello, the problem is resolt...
I have contact the seller of machine and have send me a new
coin jam
now the machine restet and start correcly

now work PERFETC ok ok ok !!!

the problem is a coin jam difected...

tanks for collaboration

Fabio