Settings change...

[antprime]

Hi there.. im from Mexico... and i have 5 of this pachislos machines...i am a big fan of any kind of electronic game... and i love the modding all my consoles and toys... searching the web i havent found many mods for the pachislos that involve the electronic part, im not interested in use real money by the way...i only found one thread (here in pachitalk), where u write a little about the pachislos microchip... im very curious of what more this machines do can do. Does any body have more information about the LE2080A-PA and LE4280B-PA micros.. i am trying to read the original chip to find a substitute so maybe we can be able to change somo of the instructions of the pachislo... but its hard whit out the correct pin configuration of the micros.. well i hope that somebody here could help me in this quest...

[dattia]

Well, I am the most non-technical resident here...but I would at least like to welcome you to PachiTalk!!!

[H20Dreams]

Actually, I am the most non-technical member here, but I too would like to welcome you to PachiTalk.

[birdbrain]

Daverob will be along shortly. he'll be the master at that. but you will find that the programing is proprietary and is just about impossible to break.
WELCOME ABOARD!! i believe you may be the first from our great southern neighbor!

[antprime]

Thanks for the welcome!!!
Did someone understands korean? I found this page http://www.doskorea.com and i send a email to the webmaster. Mr Park... but he only respond once... maybe if somebody write him in korean...

[hanabi]

http://bestsmileys.com/welcome/4.gif

to PachiTalk antprime!!




and actually I think I would win hands down in the most Non-Technical Person Category!!


but we do have a few Techie minded Members here,

[alstonj1]

Im somewhere in that list also i dont know crap when it comes to these machines just ask Sid he knows...

[antprime]

another page with more information...Welcome to www.PKLink.com the prices... $2,000.00 for the reader-writer tool and $32 each blank chip if you buy 1000...

[Sid]

Im somewhere in that list also i dont know crap when it comes to these machines just ask Sid he knows...

Jeff ive told you before its not good that you keep picking on you shortcomings.. think positive.. baby steps.. you can do it..
Rollercoasters law of electronics.

1) you don need a multimeter when you got your fingers.

[dishpan]

... you don need a multimeter when you got your fingers.

Is that like using your dog's nose for testing 9v batteries.

Warning! - Don't try this at home! Not even seasoned professionals would try this!

[Sid]

NO!

you cant use the RCLOE on anything under 120v
DUh.. its like the law

[alstonj1]

Sid from the picture you have as an avatar you have obviously overcome your short comings good for you ...

Rollercoaster is your man from what I hear what ever he touches sends off electricity .Then again theres a few others with the same rep seek them out and I'm sure you'll find someone with some answers might not be to the questions your asking but there answers none the less...

[antprime]

researching i found th features of the v4 and v2 chips..:
LE2080A-PA
· PKV2 is an 8Bit MCU. CPU instruction system is Z80 compatible, also contains WATCH-DOG TIMER (WDT ) , the timer (CTC ), IO unit(PTO) , peripheral circuit controllers
· Built-in Flash ROM 16K BYTEs (Apple&Banana )
· Built-in SRAM 512 BYTE
· Built-in SRAM data protection on power off
· Timer (ZILOG Company CTC compatible)
· Input and output the controller (ZILOG Company PIO compatible)
· WATCH-DOG TIMER ( WDT)
· CHIP SELECT signal drive the outside slave device (Max 4)
· NONMASKABLE INTERUPT (XNMI is input)
· MASKABLE INTERUPT (XNMI is input
· Inside SYSTEM CLOCK frequency: 6.0MHZ (when outside CLOCK is 12.0MHz)

LE4280B-PA
· PKV4 is an 8Bit MCU. CPU instruction system is Z80 compatible, also contains WATCH-DOG TIMER (WDT ) , the timer (CTC ), IO unit(PTO) , peripheral circuit controllers
· Built-in Flash ROM 16K BYTEs (Apple&Banana )
· Built-in SRAM 512 BYTE
· Built-in SRAM data protection on power off
· Timer (ZILOG Company CTC compatible)
· Input and output the controller (ZILOG Company PIO compatible)
· WATCH-DOG TIMER ( WDT)
· Random Data Generator(RDG)
· CHIP SELECT signal drive the outside slave device (Max 12)
· NONMASKABLE INTERUPT (XNMI is input)
· MASKABLE INTERUPT (XNMI is input
· Inside SYSTEM CLOCK frequency: 8.0MHZ (when outside CLOCK is 16.0MHz)



New question ...With current microcontroller which could replace the old?

[hanabi]

[H20Dreams]

Huh?

[alstonj1]

your a bit beyond most people with that question .Most people here are barely able to push the buttons to activate the spin sequence and you want boulian algebra and logic theory ...if you find a way to modify the machine post it most would love the chance to modify their music or theme in their machine but have failed up to this point as most manufacturers are proprietary in their designs.

[Eddie]

researching i found th features of the v4 and v2 chips..:
LE2080A-PA
· PKV2 is an 8Bit MCU. CPU instruction system is Z80 compatible, also contains WATCH-DOG TIMER (WDT ) , the timer (CTC ), IO unit(PTO) , peripheral circuit controllers
· Built-in Flash ROM 16K BYTEs (Apple&Banana )
· Built-in SRAM 512 BYTE
· Built-in SRAM data protection on power off
· Timer (ZILOG Company CTC compatible)
· Input and output the controller (ZILOG Company PIO compatible)
· WATCH-DOG TIMER ( WDT)
· CHIP SELECT signal drive the outside slave device (Max 4)
· NONMASKABLE INTERUPT (XNMI is input)
· MASKABLE INTERUPT (XNMI is input
· Inside SYSTEM CLOCK frequency: 6.0MHZ (when outside CLOCK is 12.0MHz)

LE4280B-PA
· PKV4 is an 8Bit MCU. CPU instruction system is Z80 compatible, also contains WATCH-DOG TIMER (WDT ) , the timer (CTC ), IO unit(PTO) , peripheral circuit controllers
· Built-in Flash ROM 16K BYTEs (Apple&Banana )
· Built-in SRAM 512 BYTE
· Built-in SRAM data protection on power off
· Timer (ZILOG Company CTC compatible)
· Input and output the controller (ZILOG Company PIO compatible)
· WATCH-DOG TIMER ( WDT)
· Random Data Generator(RDG)
· CHIP SELECT signal drive the outside slave device (Max 12)
· NONMASKABLE INTERUPT (XNMI is input)
· MASKABLE INTERUPT (XNMI is input
· Inside SYSTEM CLOCK frequency: 8.0MHZ (when outside CLOCK is 16.0MHz)



New question ...With current microcontroller which could replace the old?

Keep up the great posts and if you succeed alot of us will benefit. Only wish I could help.
______________________________________________________

...if you find a way to modify the machine post it most would love the chance to modify their music

Changing the Music would be an outstanding mod!

[Chrisdice]

Good luck, I wish I can help but this is way out of my league.

[antprime]

dont worry im posting in anothers forums of electronic too whatever i could find ... will be post here...