Yamato II Help...

[promojoe13]

Just got my machine today with the front glass packed separately. But the thing is...I cannot figure out how to open the front to put the glass back in?

I know it's a beginner question and sorry to bother you all, but I really want to try this thing out and that's the last stop.

My old '70's machine is easier to figure out than this.

Thanks in advance for your help!

Joe

[Sid]

if you dont have a key to open up the frame, you can open the front by using the latch on the back .

[birdbrain]

if you have the key turn it to the left

[compirate]

If you don't have a key, look at the back of the machine about half way down on the left. There's a small metal lever that you push down to open the front door.

[promojoe13]

I did have the key. I don't have an owner's manual so I had no idea to turn it left.

No if I could only get the left gun turret to work, I'll be in great shape.

Any ideas on that one?

Thanks Again!

Joe

[luckydog]

they should all rotate when powering up.

maybe its stuck a little

[arbycoffee]

check the research center, indy manual the same and star wars too
same back side
______________________________________________________
PachiTalk Research Center - Machine Manuals - Star Blazers II Large Yamato 2 - PachiTalk

[birdbrain]

all guns have to be loaded before they work!! But they probably don't teach you that in California or Australia for that matter

[promojoe13]

Well after a few days of tinkering, I got it fixed. The arm that actually moves the gun cannons had popped out. Apparently during shipping. Looks like my machine was dropped on one end since the frame is cracked and so is the bottom left plastic cover on the back. But it's all fixed and working now so I'm going to close this ticket.

Thanks to all for all your help!

Joe