Sankyo Help

[njsurfmaster]

I purchased a Sankyo Pachinko machine several years back at a local flea market. I recently got around to working on it, and after purchasing balls was pleased to find out that mechanically it worked great.

My question is regarding the wiring. I was able to get the lighting to work which as far as I can tell is only a payout light and an empty ball hopper light. There is a small circuit and solenoid / plunger near the top left that opens a small "mouth" directly below the center payout area. The lighting wiring is not connected to this circuit. There are two green wires that come out of the circuit that are not connected. I'm guessing these are the power leads. Does anyone know what was used to power this? Was there a transformer involved?

I'm using a 9vdc power supply for the lights which works fine.

I have a couple of pictures, but I'm not sure how to attach them to a post.

Any help would be greatly appreciated!

I have attached a couple of photos.

Sean

[Tulsa]

No photo's made it attached. Just click on the paperclip icon and it will prompt you to upload the picture.

[njsurfmaster]

Pics should be attached this time.

Sean