Re: Oak Cabinet Build
No problem.
Today things are getting put together. I've got everything but the machine shelf, and the ball ramps in place. I am waiting for some wood glue to set up a little bit, and then the machine shelf will go in place yet today.
One thing that I learned is that even though I have a 3/8" plug cutter, and a 3/8" countersink bit (which you would think the plug would fit the hole made by the bit), they don't fit. The plug ends up being too small. So instead, I took the 3/8" plug and put it into a bit gauge (see attached picture) to find that it was actually a couple of bit sizes smaller. I grabbed a regular drill bit of the matching size, and put it in the drill press. I set it up so that the hole depth would be the same for each hole. Glad again that I tested out on a scrap piece first.
Pictures to come later today of the cabinet progress...
Reply With Quote
