Results 1 to 7 of 7

Thread: Universal Cranky Condor burnt part on board.

  1. #1
    Tokie Owens rambo2723's Avatar
    Join Date
    Aug 2007
    Posts
    7
    Thanks
    1
    Thanks Received
    8

    Default Universal Cranky Condor burnt part on board.

    Hello, im new to this site and so far is has been great! I have a Universal Cranky Condor with a blown part on the main board "Universal 95212-A1" im hoping to identify this part and replace it myself. I have taken 2 pictures 1 is of the whole board with a red line around the part in question and the 2nd picture is a close up of the part showing most of the part # "5L3 HA13" and what it looks like. If anyone could identify this part and tell me where I might be able to order it from that would be great? Or do you think im better off sending the board out to have it repaired and if so can someone suggest a good place that repairs items like this. Thank you in advance and if anyone would like any additional pictures or information let me know.
    Attached Images Attached Images

  2. The following 3 users say "Thanks" to rambo2723


  3. #2
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default Re: Universal Cranky Condor burnt part on board.

    Member Otis51 is supposed to have a good supply of parts and some vendors like Stealth Home Amusement or DGI (Direct Gaming International) may also have some old parts like this lying around. Also you might try David at 7MileSlots, also a member who might be able to help.

    Send a private message to - Otis51 - Stealth - 7mileslots any of the three may be able to help.
    Meanwhile, somewhere in Oklahoma.

  4. The following user says "Thanks" to Tulsa


  5. #3
    Tokie Owens rambo2723's Avatar
    Join Date
    Aug 2007
    Posts
    7
    Thanks
    1
    Thanks Received
    8

    Default Re: Universal Cranky Condor burnt part on board.

    Thanks Tulsa I will pm the 3 people you mentioned. One question how can I link this post to my pm's to them so they can reed it?

  6. #4
    Site Admin Tulsa's Avatar
    Join Date
    Nov 2004
    Posts
    19,322
    Thanks
    3,317
    Thanks Received
    9,538

    Default Re: Universal Cranky Condor burnt part on board.

    See the little blue #1 to the far right of your initial post? Click on that and it will open a window with just that post. Then copy the url in your browser and in the PM, click the icon that looks like a chain-link and paste the url.
    Meanwhile, somewhere in Oklahoma.

  7. #5
    Tokie Owens rambo2723's Avatar
    Join Date
    Aug 2007
    Posts
    7
    Thanks
    1
    Thanks Received
    8

    Default Re: Universal Cranky Condor burnt part on board.

    Thanks again Tulsa ill give it a try.

  8. #6
    Tokie Owens rambo2723's Avatar
    Join Date
    Aug 2007
    Posts
    7
    Thanks
    1
    Thanks Received
    8

    Default Re: Universal Cranky Condor burnt part on board.

    Here is a picture of the Cranky Condor.
    Attached Images Attached Images

  9. The following user says "Thanks" to rambo2723


  10. #7
    Tokie Owens rambo2723's Avatar
    Join Date
    Aug 2007
    Posts
    7
    Thanks
    1
    Thanks Received
    8

    Default Re: Universal Cranky Condor burnt part on board.

    After doing alot of research in the last 2 days I found out the burnt chip is for sound. Its made by Hitachi and its an audio amplifier, I will order the chip today. After talking to a couple friends we decided if I remove the chip it should stop the short witch was popping a breaker and then the system should work fine just with no sound. Sure enough I removed the chip making sure to clean the area of any loose peices, I installed the main board and the Cranky Condor is up and runner just with no sound. I still have a few minor repairs to do, and I have to find some light bulb holders and bulbs. I need 8 of each if any one knows where I can order these from, I have included a couple picture's of the bulb and holder. Once I receive the sound chip and install it I will leave an update on my progress, Thanks.
    Attached Images Attached Images

  11. The following 3 users say "Thanks" to rambo2723


Similar Threads

  1. cranky condor help
    By jasn in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 04-29-2011, 10:36 PM
  2. Cranky Condor machine
    By melloed in forum Model Talk
    Replies: 2
    Last Post: 04-19-2011, 06:22 PM
  3. Universal cranky condor hopper error HL
    By simpleton in forum Pachislo Technical Support Tickets
    Replies: 14
    Last Post: 09-03-2007, 04:48 PM
  4. Cranky Condor : Universal Payout Setting Verification
    By grep123 in forum Pachislo Technical Support Tickets
    Replies: 8
    Last Post: 12-04-2006, 10:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •