Cell Pica Cleaner Case Mod

[Eddie]

Thx to Arby I am a member of the Cell Pica Cleaner Club.

Not willing to leave well enough alone I had to improve on the case.

It came with a cardboard cutout for the Cleaner and brushes!

That wouldnt do for such a fine tool so I picked up some 2 inch PolyEthelyne Foam and cut it to hold the items.

Now its the Haliburton of Cell Pica Cleaner Cases.

[Chris]

Mine should be arriving shortly from the great man himself. It is on a slow boat from the States.

[DrDark]

Nicely done!

I can see this project in my future

[compirate]

Always wondered why it didn't have that in the first place. How about if you cut it so the brushes lay down, or cut a plastic cup to protect them, and add a piece to the lid, the kind with the pointy fingers of foam?

[dattia]

Eddie...you are really something! That's a good thing

[Eddie]

Always wondered why it didn't have that in the first place. How about if you cut it so the brushes lay down, or cut a plastic cup to protect them, and add a piece to the lid, the kind with the pointy fingers of foam?

I wanted the Brushes to be free so that they retain their shape. They might curl to one side or not be circular laying on their side for sometime as would a paint brush left standing or leaning on its bristles.

After I took the pics I thought to place another piece in the top lid but if its done make sure to cut a spot large enough for the the brushes to totally clear the foam so as not to ruin the tips.
Remember its not like replacement brushes are available on demand, so extra care in both cleaning and handling is very important.
Just remember to be sure the brushes are throughly dry before placing back into the case.

[Chris]

Mine should be arriving shortly from the great man himself. It is on a slow boat from the States.

Well thanks to Sir Arby my cell cleaner landed in the UK in great condition just the other day so I too have joined the Cell Pica Cleaner club. Thanks go again to Arby in a great packing job, just now need to find out where to get some foam like Eddie used as this looks like a great mod to make.

Can someone tell me what the strap like item is used for in the bag

Arbybox.JPG

cellcleaner.JPG

[Lddrizzt]

That looks like an auto shooter rig.
Metal part with spring goes around shooter knob, magnet at end of wire attaches to a metal desk or something to complete the ground.
I have one and use it to test cyclic mods.

[drcrippen324]

that looks remarcably like a earth strap for auto play show me a close up and ill confirm

if it is the strap eng gose over your handle and locks it in to place and then teh crock clip hooks to earth

[Chris]

I will take a close up picture - it was in the cell cleaner case, not sure if Arby added it ?

[luckydog]

You got a freebee from Arby

[Eddie]

Well thanks to Sir Arby my cell cleaner landed in the UK in great condition just the other day so I too have joined the Cell Pica Cleaner club. Thanks go again to Arby in a great packing job, just now need to find out where to get some foam like Eddie used as this looks like a great mod to make.

Can someone tell me what the strap like item is used for in the bag

Arbybox.JPG

cellcleaner.JPG

PM me you addy Ill send you a piece.

[Eddie]

For those that have asked
This is the only proper tool to use when cutting this type of foam.
Box cutter blades are too small as are most utility knife blades.

[arbycoffee]

yes it was a freebie and yes a shooter auto tool

[rubberratt]

Mine is on the way to me thanks to Arby ! I will also make a nice foam bed for my cleaner and it's tender brushes.

Thanks Eddie for the great idea.

[rubberratt]

Just got the word that my cell cleaning kit (and some other goodies) just arrived from Arby

To quote our leader... Arby is the man!

I can't thank you enough Arby, for all that you do for all of us!

So I will cut some foam, clean a certain pachinko machine tonight, and with any luck, I will have another one to clean soon (wink)

[arbycoffee]

Pick up a couple of 1 x 4's 12 inches long and 10 dry wall screws 1 1/2 long. You need to put them on the bottom for feet when you get the machine

[rubberratt]

Thanks Arby,

I read one of your MANY helpful posts over the weekend and I bought a big 1x4, and a BIG box of drywall screws ( because that is how they sell them ) So I am ready to put on the feet

Here is a picture of the foam I acquired from where I work for my Cell Pica Cleaner case !

... now where is that long sharp knife I have hmmmmmmmmmmm

[luckydog]

this is the simplest pachinko cabinet to make, even I could do it

and in high school I was called a wood butcher in wood shop

http://www.pachitalk.com/forums/show...lish+carpenter

[rubberratt]

I just might be able to handle that, even with my 25 year old B&D jigsaw