Coin Op Pachinko has arrived!!!!!!!!!!!
Here is the run down from crate and shipping to what needs to be done. Too many pics for one post so they will be continued in following replies.
The machine was crated and shipped at a very high cost more than double the machine price. After the disaster with the Electron I didnt want any more troubles.
The crate was made very very well. The machine was packed to fit like a glove.
1/2 inch density foam was used as well as bubble wrap and special packing sandwich cardboard. The cell glass was one piece of plexi but they used glass
protection film on that!!!!
The machine had to be removed from the crate by unscrewing at least 2 sides
of the crate I chose the front and right side.
I did ask the seller to take out the balls, keys and pack them in a seperate bag, Which he did as well as the Tilt mech bob.
I also asked him to wind the power cord and tape it to the inside.
and I asked that NO PEANUTS be used.
He complied with every request.
All said and done the machine arrived in the condition that the seller sold it.
In the pics you can see
The crate.
The foam after the front panel was removed.
The Crate with the front foam removed.
The machine wrapped but still in the crate, with the right side removed.
Then the wrapped machine after removal from the crate.
Finally the machine unwrapped with cell glass protector
Reply With Quote
