Results 1 to 12 of 12

Thread: My Pachinko Cabinet Cost about $36.00 & time

  1. #1
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default My Pachinko Cabinet Cost about $36.00 & time

    Here some pictures of my machine and the Cabinet I made. The Pachinko is point floating Square and Perpendicular with the game board. The Cabinet is made from oak floor/wall trim (5 x 5/8 10 feet long piece), the rectangle is 1/8 space per side, leveled with shims then used screws to hold the machine. I used dry wall screws to put together, Pre drill all holes. The Oak base I had collecting dust, Going to change the picture on the base to fit the machine.

    On the back is the ball lifter, had to angle it, because of the electronics, but it works great, very quiet. and keeps the top filled. The base is set up with a switch to turn on the machine and ball lift at the same time. All kinds of storage under for extra balls!















    "This is My Personal Opinion and no others"

  2. #2
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default

    my idea was basically the same,

    but without a automatic ball feeder i would raise it up about 6 inches with a wider base and angle bottom board so all the returned balls would roll to the front of the machine.

    then have a trap door or lever in front to get them for replay.
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  3. #3
    You're Welcome! azlew's Avatar
    Join Date
    Nov 2004
    Posts
    4,877
    Thanks
    12,933
    Thanks Received
    2,837

    Default

    I really like what you have done with your balls


    :roll:

  4. #4
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    my wife does too :oops:
    "This is My Personal Opinion and no others"

  5. #5
    Eye Shooter JamesM's Avatar
    Join Date
    Jan 2005
    Location
    California
    Posts
    962
    Thanks
    354
    Thanks Received
    516

    Default

    Arby, my ball lifter came with a silly spring top thing on the feed rod.

    What is that rigid hardware you have on your ball lifter?

    Also, how do you keep the lifter's off switch in place in the upper bin?
    Pachislo: Bounty Killer, Shadow Hearts 2 Biohazard reserved
    Wishlist: Battle Caesar, Crazy Sword, Dawn of Dreams, Basara 2

  6. #6
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    Quote Originally Posted by JamesM
    Arby, my ball lifter came with a silly spring top thing on the feed rod.
    What is that rigid hardware you have on your ball lifter?

    Also, how do you keep the lifter's off switch in place in the upper bin?
    Spring top thing; this make your curve to put balls in your top reserve.
    Rigid hardware what do you mean ?
    "This is My Personal Opinion and no others"

  7. #7
    Eye Shooter JamesM's Avatar
    Join Date
    Jan 2005
    Location
    California
    Posts
    962
    Thanks
    354
    Thanks Received
    516

    Default

    sorry, it looked in the picture like you replaced your spring with some kind of pipe-hardware.
    Pachislo: Bounty Killer, Shadow Hearts 2 Biohazard reserved
    Wishlist: Battle Caesar, Crazy Sword, Dawn of Dreams, Basara 2

  8. #8
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default

    There is a pipe clamp holding spring tube to the wood at the top. is that what you mean ?
    "This is My Personal Opinion and no others"

  9. #9
    Eye Shooter JamesM's Avatar
    Join Date
    Jan 2005
    Location
    California
    Posts
    962
    Thanks
    354
    Thanks Received
    516

    Default

    no, I thought you had replaced the spring with a curved pipe
    like a wire conduit or something.
    Pachislo: Bounty Killer, Shadow Hearts 2 Biohazard reserved
    Wishlist: Battle Caesar, Crazy Sword, Dawn of Dreams, Basara 2

  10. #10
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default Re: My Pachinko Cabinet Cost about $36.00 & time

    This is the first Pachinko I got and look what it done to me
    "This is My Personal Opinion and no others"

  11. #11
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: My Pachinko Cabinet Cost about $36.00 & time

    It's made a better man of you!!!!!

    or, at least you feel better
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  12. #12
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default Re: My Pachinko Cabinet Cost about $36.00 & time

    I like where it has taken me, and allowed to do
    "This is My Personal Opinion and no others"

Similar Threads

  1. Custom pachinko pinball machine cabinet - below cost!!!
    By Sid in forum eBay - General Auction listings
    Replies: 1
    Last Post: 04-18-2009, 07:39 PM
  2. Custom pachinko pinball machine cabinet - below cost!!!
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 04-03-2009, 02:02 AM
  3. Custom pachinko pinball machine cabinet - below cost!!!
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 01-17-2009, 05:50 AM
  4. Custom pachinko pinball machine cabinet - below cost!!!
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 12-27-2008, 05:29 AM
  5. Custom pachinko pinball machine cabinet - below cost!!!
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 12-27-2008, 05:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •