A Note on LOTRings a Tech. thingy

**arbycoffee** · 11-24-2004, 04:28 PM

There is a gray plug on the bottom right as you look at the back, it has no cable comming out of it. Looking in the hole where the cable comes out there are a compaster (i think) and some other thingys. if it comes lose you don't have any shooting speed on your trigger, and if it comes off, you lost any trigger at all, no balls will shoot at all.

the plug just pushes in, the two screws are missing that holds this plug in, and it points down and comes lose easy.

I would check your machine and see if you have this gray plug and if it has screws holding it in.

It looks like the cable end in the back of your computer, my wife ran off with my camra. Other mod.s that are similar may have this too!

I am wordy today!

**dlowrey** · 11-24-2004, 04:30 PM

Sounds like the machine's firing speed can be controlled remotely....

**arbycoffee** · 11-24-2004, 04:38 PM

I talked to my Com.Geek and that what he said it is a patch in the loop which probley went to their mainframe, sniky Nippons, They do us proud

**pachi_sloter** · 11-24-2004, 04:46 PM

It's a CR machine. You need that plugged in to make the machine think it has a card reader hooked up.

**arbycoffee** · 11-24-2004, 04:54 PM

Oh, so that way it does not let you shoot any balls when it out, when lose it 's connection probably affects the speed ?

**pachi_sloter** · 11-24-2004, 08:23 PM

The plug that came with my Sankyo, CR Fever Arabian Nights has a sticker on it that translates to "CR Adapter". If I unplug it and turn the machine on, the machine will not fire balls and it shown an "8" on the "error display" on the back of the machine. The listing for "8" on the error code chart translates to "Prepaid card unit not yet connected".