Lock Dogs

[Eddie]

I just picked up a lock and some generic dogs for my machine as it did not come with either lock or key. I need the assembly as the machine is to be wall mounted. The dogs I have are not the right shape as you can see the fat blade is on the (Wrong Side) of the mech. Would anyone have one that would work thx Its a Sankyo case.

[slothappy144]

is that a victory or a Lumina frame Eddie?

[Eddie]

is that a victory or a Lumina frame Eddie?

I dont really know !!!!!!!!!!

[dishpan]

It is a Victory Frame.

[arbycoffee]

here is what he needs in trip dog

[arbycoffee]

closer still



more pictures on placement and how to put in

http://www.pachitalk.com/forums/showthread.php?t=3618

[slothappy144]

it looks like the glass pawl will work OK it is in the top slot the bottom pawl needs to be flattened out it goes op against the left (outer) side of the door latch hole it catches both pieces of the flat steel. Arby has a nice clear photo of it. my fuzzy photo might help show where the pawl hits on the door latch maybe you could flatten out yours between 2 hammers? or bend over enough to catch? I would put it in a vice and smack it with a very lerge hammer. you could hammer it against something solid and ugly like a curb or the top of your MG> (joking pal!)

[arbycoffee]

i would use heat to so it don't brake. get cherryish and than hit it flat

[Eddie]

I have worked with metal for years so I understand how to do it only this piece that I have would not only need to be flatened but then angled the other way! not only that I dont have my shop tools anymore! Would anyone have an extra trip dog like Arby posted pics of?

[arbycoffee]

I see if I can get one from Japan in my next box if you can't find one here.
I am sure it won't cost anything.

[arbycoffee]

I got you one comming Eddie, Like you. I do anything for Dahlia

[slothappy144]

I got you one comming Eddie, Like you. I do anything for Dahlia

Thats the best thing and I believe what he was looking for at the start.

[Eddie]

I got you one comming Eddie, Like you. I do anything for Dahlia

This ones for you from Dahlia!