Plastic to Glass modification

[Wingfat]

Does anyone know exactly how thick the large plastic "window" is on a pachinko machine (specifically Spiderman Neo). There are some fine scratches on mine and I feel tempered glass would be perfect. I found a place on the web that can cut the exact shape I need. Has anyone used these guys >> http://www.onedayglass.com/index.php Do I need anything special to mount the glass? How does one mount the glass properly?

Thanks;

Jeff

[johntofva]

I hope this helps in some way:

http://pachitalk.com/forums/showthre...+on+a+pachinko

[arbycoffee]

any good glass company should be able o do the cutting locally, 1/8 thick window glass and also if you got kids around replace with plex glass

[Wingfat]

I didn't even realize that the correct configuration was two (2) pieces of glass! My spiderman came with just one plastic sheet. The sheet seems to have been glued in at several points.

My question is when I replace it with glass, how do I secure the inside sheet to the plastic frame? Do I use glue as well? I don't see any gasket or clips to secure the sheet. The outer sheet will be held secure as its sandwiched inbetween the front housing and the plastic frame.

Thanks:
jeff

[drcrippen324]

yup its secured with silicone or glue