Ball Release

[Markweng]

On the newer machines such as Robocop, where do you find the ball release if you want to empty the machine of all balls.

Mark

[drcrippen324]

they be in difrent places on difrent frames and manufacturas wich machines are you looking for it on and we can try help

[Markweng]

Robocop and Lupin 3

Any Help would be appreciated

Mark

[drcrippen324]

ok i can do lupen 3 for you

if you look at the payout hopper at the back of the machine at the top and follow it accross to the right there should be a white flat toped pin sticking up pull the pin out and mress the square white tag near by hold in the tag and slide the hole payout motor (black rectanfle about 2 inches long by inch deepif you look through the plastic you can see belts and wheels inside ) to the right and balls will dump out of the lost ball shute at the bottom when finished push the hole assembly back to the left again and put pin back

some one else will be along shortly with the robocop answer its quite a well used frame for magic lamp and back to the future to mention a few

hope that helps a little

[Chris]

Attached is a photo that shows the back of the Robocop machine. Where I have placed the Black arrow indicates where the ball release is, you need to press this down & then all the balls out of the top hopper will empty (make sure you have something to collect these in).

Robocop.jpg

Sorry the image is not great quality - but taken with camera phone, but hope it helps.

[Markweng]

Thank you all for the prompt responses. It is very much appreciated.

Mark

[drcrippen324]

no problems mark thats what we are here for where abouts are you in the world

[Markweng]

Northern suburb of Chicago. Go BEARS!!!!!!!

Mark

[drcrippen324]

cool just wondered as you hadent added a flag it is showing your local time as mine wich is uk

and my next question would have been where did you get a lupen in the uk

[Markweng]

Bought it from a US vendor.