My Beast Sapp is crazy !

[celica]

Help me !
After a very long story (1st pachi Sindbad destroyed, Steve has resent me one but a beast sapp with Sindbad reels, I had a good price for the beast sapp), i finally have
reels for my Beast Sapp for Invicta. I put the reels on the pachislo but my pachislo is crazy !

2 problems :
-1st one, the reels doesn't show what the counter counts ! For example when i have a replay, the reels aren't replay items
I have try to fix it moving them but no way.I have noticed something, sometime, i win 10 credits but one a beast sapp pachislo, it's not
possible if i read this payguide :http://www.gaktradinginc.com/mainpag.../playguide.htm
Maybe Steve hast let a part one a sindbad pachislo ? (do you remember i have the sindbad reels at the beginning of my story)

-2d one, The counter doesn't work when win a big bonus as shown on my picture.
At the end of the big bonus, it's the same thing
So my pachislo is totally unplayable :o(
This pachislo was a gift for my brother's birthday if the delay of the reels a gift for christmas but now i think i'm cursed !!

Any specialists can help me ?

[Ooooops]
Any moderator can put my post in the good forums ?
Sorry

[luckydog]

It sounds like he replaced the main board from the Sinbad also, and now that you have the right reels it will not pay out correctly because you don't have the Beast Sapp main board..

[celica]

You've right !
I've just notice a sticker on the mainboard in japanese. This is sticker is the same in my sindbad adventure. It's seems meaning Sindbad Adventure
It's not possible .................. I have wait several months before steve send me the good reels and now it's not the good mainboard. I hope Steve will help me one more time.

[Chrisdice]

Wouldn't you be able to tell what main board is in the game by the sounds? Sinbad and Beast sapp have very different sound effects. Even inserting medals sound different on both machines.

[alstonj1]

its possible you have your reels in the wrong locations i received my hanabi that way from gaku drove me nuts for a few min till i accessed his web site and found 2 reels were swapped during cleaning ,heres the reel strips in the correct order compare them to your reels and see if they match .
http://www.gaktradinginc.com/mainpag...rrangement.JPG

if you look at the red 7's you'll be able to tell first reel has 3 red sevens in a row ,2nd reel has 7 followed by a Cherry ,3rd reel has 7 followed by a bell .

then again the sinbad does pay 10 for 3 clowns the beast zap doesnt have a 10 coin pay out combination .

[celica]

Thanks for all yours answers. I will do a simple test try to unmount my sindbad door and mount it on my unworking beast sapp. I will let you know th result but i'm sure it's not the good mainboard on my beast sapp.

[fronzdan]

From the sound of it, what Jeff is saying sounds likely. It's like the sensors on the reels aren't where they are supposed to be, or the symbols on the reels aren't what the system thinks they are...what you see isn't what you are getting. One could easily mix up the reels, especially when swapping them in/out of different machines.

[slothappy144]

The reels are left center right specific the graphics are different on each reel. a simple mix up from the left and right reel would make the symbols not line up with the payout. I never done this mixup but I have enough reels strips I can tell you they are different per reel.

[celica]

I have try to change with my working sindbad and it works !!
So i really haven't the good mainboard. You can see it in my attachement.
I'll ask to Steve to send me this mainboard. I think that it really solve my problem ! In fact Steve has sent me a Beast Sapp pachislo door and a Sindbad box. But in the pachislo box, there is a mainboard specific to the game.

[fronzdan]

This is sounding like a Frankenpachi. Glad to hear you figured it out.

[celica]

Steve will send me this board but i have another problem : How can i have access to this mainboard ? Any ideas ? I have try to unmount some part but th payout rate changer seems to block it. More strange i think i need a key to access it. See my attachments... Anybody has already unmount this mainboard ?
Thanks

[birdbrain]

ok! i ripped the board off the back of the machine to show you how to do this!!(just joking, i ripped it off earlier)
1. bend up tab above the lock
2. insert 11mm wrench and unscrew nut on back of lock
3. swing cover down and unscrew exposed screw.

1-1 second option: cut 2 small rivets that cover pivots on and lift cover off and throw it away.

[celica]

Thank you for your pics !!

[celica]

I've just received the mainboard but i think Steve has made a mistake.
Anybody can take a photo of his Beast Sapp Mainboard ? I want to verify the sticker on the mainboard ...

Thanks !

[celica]

Nobody has a beast Sapp ?

PS: Happy New Year !!

[birdbrain]

just plug it in hanging above the reels if it works then switch it. if it does not fix your problem then your reels are in the wrong order. check the reel order by comparing them to these pictures.
http://stealthhome.stores.yahoo.net/beastsapp.html
http://www.gaktradinginc.com/08pachi.../playguide.htm

[celica]

The reels are in the good order, I have already check !!!
For me, Steve has sent me the wrong mainboard, that's all
I've just ask him if he's sure of it's mainboard

[birdbrain]

did this problem get resolved?

[celica]

No....

[celica]

I'm still waiting for a part from Steve