Page 1 of 2 1 2 LastLast
Results 1 to 20 of 39

Thread: A good stand

  1. #1
    Tokie Owens stss95's Avatar
    Join Date
    Nov 2006
    Posts
    4
    Thanks
    0
    Thanks Received
    10

    Default A good stand

    I just got my first machine a couple of weeks ago, Dracula Blue. Anyway i was looking for a nice stand for it and i found this one at staples for $34.99,
    its 23x23x29 and comes with wheels for the bottom but i left them off. Just thought I would let everyone know where they could get a cheap stand for their machine.


  2. The following 7 users say "Thanks" to stss95


  3. #2
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: A good stand

    There is ALWAYS interest in finding affordable stands. Thank you.
    Dawn

  4. #3
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,335
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: A good stand

    Unfortunately that link shows as Page unavailable to me..........

    But............

    WELCOME TO PACHITALK stss95!!!


    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  5. #4
    Kungishi minnesotabrad's Avatar
    Join Date
    Feb 2005
    Location
    Minneapolis MN
    Posts
    1,307
    Thanks
    313
    Thanks Received
    597

    Default Re: A good stand

    Welcome to the forum! The link does not work for me either. I have bought some inexpensive stands that have wheels and never had a problem. Just make sure you are careful or take off machine when moving it.
    and a few others.

  6. #5
    Tokie Owens stss95's Avatar
    Join Date
    Nov 2006
    Posts
    4
    Thanks
    0
    Thanks Received
    10

    Default Re: A good stand

    maybe i just don't see it, but how do you edit your post???

  7. The following user says "Thanks" to stss95


  8. #6
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: A good stand

    You only have a limited time to edit a post after it has been put on the forum. You must make a new post at this point.

    After you post, you will see an edit button down by the Thanks and Quote buttons. While it remains, you have the ability to edit. Once it goes away, you cannot edit.
    Dawn

  9. #7
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default Re: A good stand

    Quote Originally Posted by stss95 View Post
    ... found this one at staples for $34.99,
    its 23x23x29 and comes with wheels for the bottom but i left them off.
    I'm thinking he means this stand.
    I saw them at the store the other day too... and thought, "What a great pachislo stand!"
    (Why do we do that?!??)

    Even though the online listing says $49.99 the price at the store was indeed $34.99. The doors for storage were a nice touch... and it looks much better than in the pic.

    Click the "more views", and check out the other pic... it's more realistic.

    http://www.staples.com/webapp/wcs/st...&cmArea=SEARCH
    logicprobe
    Retired - Living on a Wing and a prayer!

  10. The following 4 users say "Thanks" to logicprobe


  11. #8
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: A good stand

    His link works fine for me...yes it is the same stand.
    Dawn

  12. The following user says "Thanks" to dattia


  13. #9
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default Re: A good stand

    Cool... I couldn't see the item either from that link.
    Just a server error: Firefox can't find the server at phvrf.yahoo.com
    logicprobe
    Retired - Living on a Wing and a prayer!

  14. #10
    Sir Carl slotter's Avatar
    Join Date
    Dec 2004
    Posts
    7,742
    Thanks
    2,269
    Thanks Received
    2,424

    Default Re: A good stand

    That first link doesn't work for me either and I'm using IE 7.x

    Thanks for putting up the Staples link, LP!

  15. #11
    The Diceman Chrisdice's Avatar
    Join Date
    Sep 2005
    Location
    Seaford, Delaware, United States
    Posts
    3,358
    Thanks
    1,973
    Thanks Received
    3,979

    Default Re: A good stand

    Link dosen't work for me. I always go for the $19.00 wal*mart tv stands. Work great for pachislos and they work good for the pachinkos also.
    Chris Dice
    Yo 11 any 7

  16. #12
    Tokie Owens stss95's Avatar
    Join Date
    Nov 2006
    Posts
    4
    Thanks
    0
    Thanks Received
    10

    Default Re: A good stand

    Yes that is the same stand, works great, just thought i would let everyone know who was looking for a stand, thanks guys.

  17. The following 2 users say "Thanks" to stss95


  18. #13
    Kungishi fronzdan's Avatar
    Join Date
    Jan 2006
    Posts
    1,546
    Thanks
    954
    Thanks Received
    1,165

    Default Re: A good stand

    That's pretty nice. I may have to check them out since the kitchen utility carts I've been getting at Walmart have gone up to $25. These look a little sturdier too and I like the doors.

  19. #14
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Smile Re: A good stand

    I got this one today at Goodwill for $2.00

    The top is scratched up, but a pachi will be sitting there

    It's 26 inches high, 25 inches wide and 14 1/2 inches deep

    very heavy wood with a small drawer on top and storage below.
    Attached Images Attached Images
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  20. The following user says "Thanks" to luckydog


  21. #15
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default Re: A good stand

    Quote Originally Posted by logicprobe View Post
    Even though the online listing says $49.99 the price at the store was indeed $34.99. The doors for storage were a nice touch... and it looks much better than in the pic.

    Click the "more views", and check out the other pic... it's more realistic.

    http://www.staples.com/webapp/wcs/st...&cmArea=SEARCH
    UPDATE!!!
    These are NOW on sale at Staples for $24.99 each!
    Click the link above, or check your local sales flyer.
    Nice deal on a nice stand!
    (Online purchases ship free w/ minimum $50 purchase... I think I'll grab two stands and a pencil or something!)
    logicprobe
    Retired - Living on a Wing and a prayer!

  22. The following 3 users say "Thanks" to logicprobe


  23. #16
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: A good stand

    I saw that in sundays flyer, I forgot about it till now
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  24. #17
    Eye Shooter Delgrieve's Avatar
    Join Date
    Nov 2006
    Location
    Yukon Oklahoma
    Posts
    599
    Thanks
    489
    Thanks Received
    460

    Default Re: A good stand

    A great find - and now $25! Thanks!

  25. #18
    Sandwich Shooter gottac's Avatar
    Join Date
    Nov 2006
    Posts
    437
    Thanks
    659
    Thanks Received
    771

    Default Re: A good stand

    I bought 5 of these stands from staples! and my brother bought 3!

    I did not need 5 right now (I am using 3) but this way down the road I will have matching stands! They are nice and sturdy, I used wood glue instead of the white glue it came with and I used L brackets in addition to their pins to mount the shelf. The L brackets helped to tie the whole thing together...

    Also I did away with the roller casters (I didn't think they mixed well with a tile floor and a 4 year old!) I put some nice rubber stick on feet so it won't move on the tile floor.

    Thanks for the heads up on these!

    PS I asked Staples the capacity ratings in lbs and they could not tell me... but when I got them and looked at the installation instructions and it states Maximum capacity: 120lbs top / 80lbs shelf / 80lbs bottom
    PoPeye / Rio de Carnival / Neo Magic Pulsar / Sinbad Adventure / Fist of the North Star / Death Valley / The Cross "Dracula" Pinballs: TZ, RFM, SWE1, LAH, STTNG, TOM

  26. The following 2 users say "Thanks" to gottac


  27. #19
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default Re: A good stand

    It's gonna be hard to beat that deal, with weight specs like that.
    Thanks for filling us in.
    Did you get the brown or black?
    logicprobe
    Retired - Living on a Wing and a prayer!

  28. #20
    Sandwich Shooter gottac's Avatar
    Join Date
    Nov 2006
    Posts
    437
    Thanks
    659
    Thanks Received
    771

    Default Re: A good stand

    I got the black... they had 3 in store that were called "cherry" but really looked more like a oak to me.

    On the website I think they only have black left.

  29. The following user says "Thanks" to gottac


Page 1 of 2 1 2 LastLast

Similar Threads

  1. Good source for good clean spheres?
    By popeye in forum Modern Pachinko
    Replies: 4
    Last Post: 07-02-2009, 06:33 PM
  2. 2X6 stand up
    By rdmkr1 in forum These are the days of our lives...
    Replies: 1
    Last Post: 12-21-2007, 09:28 AM
  3. Plastic util. shelving DOESN'T = good pachi stand...help?
    By morecraphere4u in forum Model Talk
    Replies: 18
    Last Post: 07-20-2007, 01:03 AM
  4. Good Deal? Good Vendor? - Pachinko
    By jaiello in forum Vendors & Manufacturers Pachinko
    Replies: 6
    Last Post: 05-19-2006, 06:30 PM
  5. Please Stand By.
    By Sid in forum Dear Arby
    Replies: 3
    Last Post: 12-28-2005, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •