Oriental Fluoresecent Lights

[PACHIPAUL]

I'M A NEWBE WITH A UNIVERSAL ORIENTAL MODEL .I NEED HELP FINDING A SOURCE FOR REPLACEMENT FLUORESECENT BULBS FOR MY SKILL STOP. I ALLREADY TRIED TO USE A HARDWARE STORE REPLACEMENT ,WHICH BURNED OUT WITHIN 5 SECS.THE BELLY LIGHT WORKS PERFECTLY, ONLY THE OTHER TWO ARE INOP. HAVE A NICE HOLIDAY WEEKEND.

[H20Dreams]

Welcome to pachitalk. Someone will be along to assist you in a moment. In the meantime, please use the search feature on the top of the page.

[Lddrizzt]

Contact one of our vendors, I'd recommend either Stealth or Gaku. Click on their names in this post and it will link you their sites. Then give them a phone call. They should have the part you are looking for.

[hanabi]

Welcome to PachiTalk PACHIPAUL!!!




and I'm sure you'll find the answer to your problem real soon -if you have not already done so........

[alstonj1]

whats the number on the bulb in question most likely you can get the bulb at a home depot near you . a picture of the actual bulb would help also .most likely You want a common "F8T5CW" which is 12" long. the part that matters is the 8 which is 8watt the cw meaning cool white or blueish color .

[PACHIPAUL]

Hi Jeff ,there Are No Numbers On The Bulbs .the Bulb Which Burned Out Was Purchased From A Home Depot.are The Bulbs 220 Volt? Thax Paul

[birdbrain]

are you suppling the machine with 220V ?
if so you already have a problem!!

[alstonj1]

no the ballast should be 100 or 110 volt ac some have 24 volt ballast either way the ballast will step up the voltage to the required voltage for the bulb .try the F8T5CW bulb it should work just fine in most machines .if not and you have an exotic bulb of some type you can buy a 110 volt under cabinet fixture for a couple bucks to replace the current one mounted in your unit and replacement bulbs are a dime a dozen for these units.just make sure you find a small enough one to fit the machine .

Hi Jeff ,there Are No Numbers On The Bulbs .the Bulb Which Burned Out Was Purchased From A Home Depot.are The Bulbs 220 Volt? Thax Paul

[Lazarus]

First things, Welcome! Now lets figure out what machine this is. Have at least one of these? Picture of machine, machine name, company that made it, or description. Then you say bulb for belly glass is fine but there are others that are burned out. Can you describe it? Size, shape, where in machine. With as much of this as you can, we will be able to help you better.

[slothappy144]

Check with applegrove He has good used parts, and is looking to help out members.