Autoplay

[tornadoclaw]

What is the best way to get a pachinko machine to autoplay that will not damage the shooter knob? Arby tests machines by having them run for 10 hours, according to the Pachitalk auction page. How is the autorun accomplished?

[arbycoffee]

I ground the ring and use masking tape.

But I got a new tool from the land of the rising Sun

A spring set tool with a ground magnut.

. . . auto_play_2.jpg . . .

[luckydog]

Just keep an eye out for a ball jam

Usually the only way to clear it is open the glass door

That's where your magnet on a stick comes in handy

[slothappy144]

why do you need to ground the knob?
is there a circuit like on a dimmer switch acting as a safty?

[luckydog]

The machines are setup for palours so you have to keep your hand on the whole shooter knob to play.

[slothappy144]

Ahh, never knew that, thanks LD. must be to keep people from playing several at once or something.

[drcrippen324]

the shooters have a earth loop circet in them to stop the machine from working if your not holding the shooter that way you cant do what the auto play dose in a parlour so it stops you playing more than one machine at once but the grounding loop fools the machien into thinking you are holding the shooter

[chmer01]

I ground the ring and use masking tape.

But I got a new tool from the land of the rising Sun

A spring set tool with a ground magnut.

Arbycoffe you have all the cool toys.

Eric

[slothappy144]

the shooters have a earth loop circet in them to stop the machine from working if your not holding the shooter that way you cant do what the auto play dose in a parlour so it stops you playing more than one machine at once but the grounding loop fools the machien into thinking you are holding the shooter

yup I get it, makes it harder to play muitiple pachi

[birdbrain]

rubber band, bare wire and aligator clip

[slothappy144]

rubber band, bare wire and aligator clip

True McGuiver fasion!

[arbycoffee]

I love Toys !!! and the Cooler the better

[tornadoclaw]

I ground the ring and use masking tape.

But I got a new tool from the land of the rising Sun

A spring set tool with a ground magnut.

. . . auto_play_2.jpg . . .

How much would you charge for the new toy?

[arbycoffee]

$20 and that is with mail in the 48 states a little higher for other countries

[chmer01]

$20 and that is with mail in the 48 states a little higher for other countries

Will you be putting them in the auction area or should we PM you?

Eric

[luckydog]

send Arby a PM!!!

[chmer01]

Thanks Luckydog.

Eric