real slot handles

[Frank A]

I did my Speed Racer. The middle position of the switch on the arm goes to the orange wire from the small black knob as a splice. Do not cut the existing wire. The bottom position of the switch connects as a splice to the purple wire coming from the small black knob as a splice. Do not cut the existing wire. I have the autostop with credit mod and it works perfectly. Make sure that you remove the solenoid assembly or the arm won't work. Do not use the top position on the switch. Frank A, Jackson, NJ

[ddancers]

Thanks for the Welcome Everyone.
Also for the Speed Racer info. My Speed Chaser may be the same wiring color when I get to it. At present I’m remodeling basement to accommodate slots, arcades, pinball’s, and Skee Ball. It will take nearly a year to complete. Somewhere in between I’ll get to handle. So if sometime down the road anyone does install on a Speed Chaser let me know your configuration. I currently have five machines Gamera, Popeye, Speed Chaser, Ire Gui , and Super Black Jack. I will be purchasing one more within the next 6 months this will round off the Slots Room.
Thanks Again
Great Site
Ddancers http://www.dirtydancing.us/Gallery/Pics/jmdanc24.jpg

[alstonj1]

I 'm sorry thought you said speed racer .... never heard of speed chaser ... got any pics of it would love to see it .

[Sid]

for those that believe that pachi should never have handles i present this piece of pachi history now on ebay...
http://cgi.ebay.com/LAS-VEGAS-STYLE-...QQcmdZViewItem ...... don't touch me you dirty apes !!!!!

great movies... (the originals anyway)

[ddancers]

No Problem alstonj1
Here's an online picture.

http://www.sexybloomers.com/nyeve/PA...aser_small.jpg

Ddancers

http://www.dirtydancing.us/Gallery/Pics/jmdanc24.jpg

[alstonj1]

who is the maker?
most of the machines i have done have 3 wires going to the spin control lever (red,black,yellow) the red to black measures 5volt dc (control voltage )and the yellow to black measures 5 volt dc (black is common ) the yellow is the signal line the red and black are control voltage . shorting the yellow to the black momentarily brings the voltage to 0 volt dc and a spin results . if yours is different let me know .

[alstonj1]

if your still looking for the wire combination for your igt slot arm take a look at this post it'll help you find the right combo to use .
http://www.pachitalk.com/forums/showthread.php?t=14570
skip down to where i describe the new credit mod i added to bunny girl .

[ddancers]

Thanks I'll check it out.

Ddancers

[Frank A]

What is the link to the seller of the handles ? I lost his ebay name and link. Has he raided his prices again ? Thanks, Frank A

What is the link to the seller of the handles ? I lost his ebay name and link. Has he raised his prices again ? Thanks, Frank A

[dattia]

It is back on the first post of this thread. I would link you, but I don't know how. Anyway, I just went to his listings and I didn't see the handles anymore.

[alstonj1]

heres the link again :
http://cgi.ebay.com/IGT-ST-COMPLETE-...ihZ010QQcatego


try messaging him he may have more just doesn't have them listed .....

[Frank A]

I sent him an e-mail and he is sold out. Oh well !!!

[alstonj1]

I sent him an e-mail and he is sold out. Oh well !!!

we squeezed em dry ...... theres another company on ebay i think its Ohio slots or something like that ya might message them ..... i still have one left (to go on bunny girls ) and the original gold arm i removed for a chrome one to use on a few machines

[alstonj1]

if anybody is intrested in getting a slot handle i found a company that has them but they cost a bit more . The price is about the same as the cheap flimsy kits on ebay sell for . I dont have to tell you these are the real deal and a heck of a lot better quality than those pieces of junk . heres the url

these are the same units weve been using in this thread so the installation is exactly the same .

http://www.ohiogaming.com/jackpothandleassm.htm

[drcrippen324]

Just emailed them to to see if they will ship to the uk and got my fingers crossed could be the arm im looking for to go on betty

[Tulsa]

Don't force me to change your name to drfrankenpachi!~

[drcrippen324]

no no jeff is the origonal Dr Frankenpachi im just trying to keep the Mrs happy

[alstonj1]

Thats right you can add it to my avitar if you wish a title i'm proud to wear !!!!!

[Tulsa]

I'm such a sucker for personal requests...

[drcrippen324]

that kinda its his avatar aswell its creepy looking