real slot handles

[alstonj1]

My handle arrived yesterday and I am about to start installation. Yes, the 1/4 inch carraige bolts provided will be too short. I will be mounting mine low on my Speed Racer cabinet as some of the other members have done. The real slot handle has three leads/wires on the switch. The two lower ones provide a momentary closed when the switch is pushed and the upper one provides a momentary open when pushed. Do I need to use the third wire momentary open function on the switch ? The original black spin knob has three wires too. Red, brown and orange. The thread says to use the brown and orange wires. What does the red wire do ? Does this correspond to the third momentary open lead on the real slot handle ?

Frank A

Frank your only going to need the common and the normally open contacts (momentary closed) the other isnt used . as for the wireing on the speedracer contact autoslot for the two wires needed to spin the machine the wire colors are diffrent on each type of machine thats why he has so many models of autostop boards .