Taiyo Maturi cab speaker wiring....

[Bigsasquatch]

Just managed to fit a small syscom pot at the back of the lower speaker of my Maturi cab.....

Bit of a bonus is the speakers appear to be wired on a loop, so only one pot adjusts the volume for both speakers.... Nice as I was running out of Syscom pots.....


BIG S

[arbycoffee]

S u p e r C o o l s t e r !

[Bigsasquatch]

the animated GIF's get worse...............he he


BIG S

Its actually a bit of a challenge when you get your first Maturi cab as its only the second cab I have had where speakers aren't mounted in the opening cell door ( the other one being CR Fireworks )

At first there seems no way to get at the wiring until you completely remove the lower speaker. Then you can unplug it , cut the +ve wire then there is just enough room to fit a syscom pot in behind the speaker when you re-mount it .

True its a bit of a pain to re adjust as you have to remove the speaker again, but if you are looking to set a comfortable volume and then play this is a reasonable solution.......

Just thought I might share this for anyone just about to get a Maturi / Taiyo cab...


Cheers

BIG S

[arbycoffee]

is this better pay no attention to bart