Page 1 of 9 1 2 3 4 5 6 7 8 9 LastLast
Results 1 to 20 of 163

Thread: Spiderman Error Code help

  1. #1
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Spiderman Error Code help

    Hi guys,

    I have an error code on the Spiderman i just purchased and i am trying to figure out what the hecks going on..

    ERROR 1

    the machine plays fine, LCD musice shooter everything.. but it will not pay out any balls. nothing

    oh there are no balls jammed anywhere,


    any ideas where i should be looking to take care of this problem?

    thanks and its muchly appreciated

    Sid

    "I've stopped fighting my inner demons, we are on the same side now."

  2. #2
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,913

    Default Re: Spiderman Error Code help

    Have you tried a reset?

    "Blowing smoke rings at the moon."

  3. #3
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    yup.. I have reset the machine.

    SPIDERMAN ROM CLEAR

    "I've stopped fighting my inner demons, we are on the same side now."

  4. #4
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,913

    Default Re: Spiderman Error Code help

    It just doesn't like you, better luck next time.

    You do have balls in it, right?

    "Blowing smoke rings at the moon."

  5. #5
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    what im suppose to put balls in it???
    you mean it doesnt make the balls inside?


    Yes it has balls inside....

    "I've stopped fighting my inner demons, we are on the same side now."

  6. #6
    Eye Shooter Mike's Avatar
    Join Date
    Nov 2005
    Location
    Kent
    Posts
    853
    Thanks
    500
    Thanks Received
    312

    Default Re: Spiderman Error Code help

    I had the same problem when I got my Star Wars from Steve - no Error 1 message though. I just had to move the gate at the back of the machine to allow the balls through to the right place (sorry, don't know techincal terms!). As soon as I did that, machine was playing catch up and I had to shovel balls for 1/4 of an hour. Apart from that problem, how is it Sid?
    Star Wars, Spin Luck#749. Jet Set Radio, Space Shuttle Pinball & Monolopy quiz machine

  7. #7
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,913

    Default Re: Spiderman Error Code help

    So are the balls in the back making it to the payout motor?

    If not, flip the little plastic thing out of the way so they can.

    "Blowing smoke rings at the moon."

  8. #8
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    The plastic gaurd is out of the way.
    the balls make it to the Payout motor fine...



    i will try to use a multimeter as per Docs, Suggestion to see if there is some sort of signal being sent to the motor.. (now i got to empty out all the balls again) my Mrs.. Loves the noise.....
    Last edited by Sid; 05-01-2006 at 05:18 AM.

    "I've stopped fighting my inner demons, we are on the same side now."

  9. #9
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    Quote Originally Posted by Mike
    I had the same problem when I got my Star Wars from Steve - no Error 1 message though. I just had to move the gate at the back of the machine to allow the balls through to the right place (sorry, don't know techincal terms!). As soon as I did that, machine was playing catch up and I had to shovel balls for 1/4 of an hour. Apart from that problem, how is it Sid?
    The machine is very cool.. though i must admit i havent had a chance to play it more then five minutes due to other obligations.. once i get it sorted i plan on putting it through its paces and i'll be able to give a better review/rating then..

    "I've stopped fighting my inner demons, we are on the same side now."

  10. #10
    The Exorcist Chris's Avatar
    Join Date
    Mar 2006
    Location
    Bradford, West Yorkshire
    Posts
    2,103
    Thanks
    2,808
    Thanks Received
    2,581

    Default Re: Spiderman Error Code help

    Sid - Cannot help with the error code - sorry, but I just wanted to say I am glad you finally got the machine in the end. I got my Spiderman about 3 or 4 weeks ago, but it has not made it out of its packing box yet!

    Hope you get it fixed soon.... I am sure someone on here will be able to help
    Chris
    Pachinko : Star Wars, Julie Pinball, Super stadium, 007, Freddie Vs Jason, Haunted Mansion, Vicky Chance. Pachislo : Terminator (Original).

  11. The following user says "Thanks" to Chris

    Sid

  12. #11
    Corporate Destroyer Lddrizzt's Avatar
    Join Date
    Nov 2004
    Location
    NW Pennsylvania
    Posts
    5,665
    Thanks
    1,084
    Thanks Received
    3,178

    Default Re: Spiderman Error Code help

    Sorry to hear that you can't properly play with yer balls Sid.
    I never encountered any errors when I actually filled the hopper and before I went cyclic. And that I'm running it cyclic well you know..
    Greg should jump on here sometime this morning I am sure, he might know.
    Have you unplugged and replugged all the connections? Something might have come loose in the trip down to ya.
    I just looked at the back of mine, and with my thumb on the lock knob to close the plastic shield, there was a dump lever right at my finger tips, I accidently pulled it and balls dropped out, Now that is weird because I haven't disconnected any of the electronics or motors for the cyclic conversion, so all of the balls should have been out. Maybe I have something loose also. I have a number one in the LED on the back, now I am confused too.
    But since I don't use the hopper it doesn't affect how I play. Here's a thought, do you have a cyclic version? or do the spent balls fall out the back?

    This is my personal opinion, or of the voices in my head, and are not meant to reflect the opinion of this board.

  13. The following user says "Thanks" to Lddrizzt

    Sid

  14. #12
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    The balls fall out the back...without a problem

    I have disconnected and reseated all the connections leading to the payout motor assembly...

    I have also disconnected the payout assembly taken it all apart removed the motor checked connections on that.

    I have noticed an LED that is on on the left top section.. will post image shortly...

    "I've stopped fighting my inner demons, we are on the same side now."

  15. #13
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    You can see what im talking about by looking at the upper left

    although the other lights/leds are off, there is one Blue LED lit?
    is this some sort of extra error notification? or is it just an LED thats on for whatever reason.


    "I've stopped fighting my inner demons, we are on the same side now."

  16. #14
    Corporate Destroyer Lddrizzt's Avatar
    Join Date
    Nov 2004
    Location
    NW Pennsylvania
    Posts
    5,665
    Thanks
    1,084
    Thanks Received
    3,178

    Default Re: Spiderman Error Code help

    THat one is lit on mine also. I know on some machines a LED will light on the front if the hopper is empty. That might be that light. I dunno, I do know that Greg uses a ball lifter with his, so it's not cyclic and he Should have a better idea than I. But I do think that is the hopper light, is yer hopper full? if so, take a look at the switch connections for it and see if the sensor switch there is connected properly.
    Well I gotta get off to work, I will pop on tonight when I get home and see how ya made out.

    This is my personal opinion, or of the voices in my head, and are not meant to reflect the opinion of this board.

  17. The following user says "Thanks" to Lddrizzt

    Sid

  18. #15
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Spiderman Error Code help

    Upper left is payout light, right is hopper empty light

    If left is lit, there are payouts in the computer.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  19. The following 2 users say "Thanks" to compirate


  20. #16
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    ok so its got payouts in the memory.. How do i get it to get rid of its memory or whatever and start paying out?

    "I've stopped fighting my inner demons, we are on the same side now."

  21. #17
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default Re: Spiderman Error Code help

    Your pay out motor is not working, maybe a ball jamb in the motor. Take out your motor (don't forget pictures as you go) see if with a probe you can rotate it ?
    "This is My Personal Opinion and no others"

  22. The following user says "Thanks" to arbycoffee

    Sid

  23. #18
    Captain Weirdo Sid's Avatar
    Join Date
    Sep 2005
    Location
    Athens Greece
    Posts
    24,902
    Thanks
    19,835
    Thanks Received
    28,648

    Default Re: Spiderman Error Code help

    I have taken out the motor and it is all clear of blockages etc..
    the motors gear rotates when i turn it by hand.

    "I've stopped fighting my inner demons, we are on the same side now."

  24. #19
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default Re: Spiderman Error Code help

    I will try to duplacate the erroe 1 you got on my machine
    "This is My Personal Opinion and no others"

  25. The following user says "Thanks" to arbycoffee

    Sid

  26. #20
    Mr. Pachitalk arbycoffee's Avatar
    Join Date
    Nov 2004
    Location
    Jesup Iowa 'The Right Place'
    Posts
    19,372
    Thanks
    2,920
    Thanks Received
    15,150

    Default Re: Spiderman Error Code help

    with someone droping in a ball or two in the center pocket. you have your ear on the payout moter to hear if she spins. if she does you might have a blockage farther down the tube in the pay out trouffer. I have found in some a peanut for packing that have caused me to do a complete tear down.
    You try a upside down rock on the floor ?
    "This is My Personal Opinion and no others"

  27. The following user says "Thanks" to arbycoffee

    Sid

Page 1 of 9 1 2 3 4 5 6 7 8 9 LastLast

Similar Threads

  1. error code
    By chipinmass in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 02-19-2011, 07:05 AM
  2. Error Code Help
    By cburnett11 in forum Pachislo Technical Support Tickets
    Replies: 20
    Last Post: 09-24-2009, 11:40 PM
  3. Error Code 8
    By 1manshow in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 08-29-2009, 06:24 PM
  4. Error code E0
    By topcat in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 03-05-2009, 10:08 AM
  5. HELP ME for code error CR
    By fabio in forum Pachislo Technical Support Tickets
    Replies: 9
    Last Post: 05-20-2008, 07:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •