Help!!!!! need a picture

[luckydog]

I got my Dragon Monkey, the balls keep falling thru to the back tray, I can't find the dump lever to stop it.
can someone post a picture of where it is on a thunderzone case

[drcrippen324]

give us a pic of the back of the machine close up in 3 pics if need be and i will help if i can ifnot someone will
iv come across some strange ball dump places on my travels through pachitalk and the net one been operated from behind the glass by a slit in the cell

[Tulsa]

Lucky, there is a small hole on the left side of the case, upper third, and the lever is right behind that hole. You should be able to straighten a paper clip and push it through the hole and release that switch.

[slotter]

Museum pics have the pics you are likely looking for, LD:

http://www.pachitalk.com/4images/det...=5&mode=search

[luckydog]

Thanks for your help guys, but, believe it or not Slotusa customer support walked me thru the problem.

there is a small white tab between the frame and machine about 4 inches from the top right of the back, all i had to do was pull it toward me.

All working great now

[arbycoffee]

Lucky, there is a small hole on the left side of the case, upper third, and the lever is right behind that hole. You should be able to straighten a paper clip and push it through the hole and release that switch.

MVC-005F.jpg 12345678901234

[Tulsa]

Thanks for your help guys, but, believe it or not Slotusa customer support walked me thru the problem.

there is a small white tab between the frame and machine about 4 inches from the top right of the back, all i had to do was pull it toward me.

All working great now

Now get that paperclip handy and you can access it through that hole.

[arbycoffee]

you are no fun!, I be so sorry I will go stand in my corner now

[slotter]

That hole in the front you access with the clip dumps the balls. What LD needed was to reset the dump, I think. Anyhow, he's got it solved now. Arby had made pics of the TZ and they are avail in the the Museum to show how to reset that flipper/tab.

[Tulsa]

That hole in the front you access with the clip dumps the balls. What LD needed was to reset the dump, I think. Anyhow, he's got it solved now. Arby had made pics of the TZ and they are avail in the the Museum to show how to reset that flipper/tab.

Right, press it to dump them, press it again to stop the dump. His was already pressed.

[drcrippen324]

wow im supprised how close i was when i told of the one i had herd of through the slot in the cell few cm to the left and id have hit the nail on the head

glad you got it sorted LD

[luckydog]

here's the white piece i had to move to the back to keep balls in tracks and payouts