Pachinko free standing case

[arbycoffee]

Very nice idea

freestanding.gif

[Sid]

Very Nice indeed.
looks pretty simple to build too.. nice find Arby..

[RKnarr01]

arby, did this come from YJ? You dont happen to know the measurements do you?

[arbycoffee]

off Yahoo, just figure 1x4s and back figure from the machine.
Higth being what you want to set in

[Lddrizzt]

Doesn't look to hard to make or figure out the measurements. If I get some time I will see what I can come up with over the next couple of days.

[RKnarr01]

i have roughly figured out the dimensions. Does anyone know of a free CAD program that is easy to use. ive recently built two more cases but everytime i finish one i end up seeing something i can improve on and no longer like the case i just built. but i really like this one!

[scooby_doo_m2002]

I saw something similar to that somewhere on the net but they had them for pachislos...

[luckydog]

If you look at the 1st post there is a pachislo in one of these cases in rhe background also

[Tony Junior]

Nice! Perhaps someone here will modify something like that for ball handling.

[ken524]

i have roughly figured out the dimensions. Does anyone know of a free CAD program that is easy to use.

I use DeltaCad. It's not free, but has a fully functional demo for 45 days. If you build a lot of stuff, it's worth the $39. I use it for all sorts of stuff.

www.deltacad.com

-Ken

[RKnarr01]

thanks ken ill download that

[Hillbilly_Savant]

Just make sure your rough opening that you are mounting the machine in is about 1/4" larger than your machine in each dimension. A good height from the floor to the top of the machine is 53". I am tall, but that puts my eyes about 4" above the center of the playfield, and the shooter knob right at hand on the knee level. A free standing case is nice due to movability, but you have to screw it into the wall or it will tip very easily.