Another cabinet design

[DaveCapps]

Actually while the plans do call for wetting the wood if you just cut it a little long you can simply force it into place with a nice curve to it. Use a couple of 3/8 screws at the hole to hold it in place. I used this technique for all of the cabinets I built. Good luck

[Moparformances]

Actually while the plans do call for wetting the wood if you just cut it a little long you can simply force it into place with a nice curve to it. Use a couple of 3/8 screws at the hole to hold it in place. I used this technique for all of the cabinets I built. Good luck

I agree with dave.. i would not bother wetting.. a few screws and a good bit of glue and your good to go.. (IMHO)

[ackleplem]

Thank you, Dave and Mopar. I appreciate the input. That will save me some work. A quick question, how much longer do you make that piece?

[Moparformances]

Thank you, Dave and Mopar. I appreciate the input. That will save me some work. A quick question, how much longer do you make that piece?

a 1/16 possaably an 1/8 inch.. cut it long and trim it down if needed..

measure twice cut once???

measure long and cut twice..