homemade nail adjustment tools

TilionMtl · 06-30-2009, 11:47 PM

Here is some pic of my nails adjustment tools.

I bought pliers at the $1 store, and with my dremel and a grinding disk, I made a T shape in the pliers nose, so the head of a nail will fit in the top of the T, and the body of the nail is held down between both pliers tip. It allow me to gently bend the nail if need.

nailsadj_01.jpg

I recommend trying to find pliers without teeth, or grind them so it don't damage the nails

nailsadj_02.jpg

It was hard to check the proper spacing between nails. Trying to hold a ball by hand between two nails usually end up with the ball falling off, or not seeing properly. So I made a gauge to see if a ball go between two nails or not.

nailsadj_03.jpg

I held a pachi ball in metal clamp, because I don't have a vice. Using the dremel and grinder disk, I carved a path all around the ball. I used a metal wire, bent it around the ball in the carved path, bent again the two extra length to join them to make the long handle. I used a little copper wire curved around the two wire of the handle, near the ball to hold the ball in place. I used heat shrinking tube to make the extremity of the handle. It's nice to have the ball at the extremity of a handle about 8" long, to be able to go everywhere, at any angle.

nailsadj_04.jpg

Of course this gauge have a single size, so it is usefull only to see if a ball can go easily or not between two nails. because the metal wire around the ball is not completely hidden in the ball, and make the ball a bit larger where the wire is, it kinda give me two possibility. I can move the ball between the nails, with the metal wire not agains the nail, this give me the real size, the tighter setting for a ball to go between nais, or I can move the gauge with the wire toward the nails, for an extra spacing between nails.

Hope this can give you some ideas.

Cost of the nails adjustment tools (pliers and gauge), about $1.50

musky · 07-01-2009, 07:37 AM

Excellent job, I like homemade tools.

Sid · 07-01-2009, 07:41 AM

Well done indeed!

new in town · 07-01-2009, 07:48 AM

A True "Handi Pachi"

bfree · 07-01-2009, 01:11 PM

That's a winner!! great job.

TilionMtl · 07-01-2009, 02:52 PM

There's a US seller which was selling gauges and so on some time ago. Unfortunately he didn't want to ship to Canada, so I made the gauge myself. it's not as pretty as the real adjustment tools, but really useful, I recommend to everyone to get one or make one.

The only thing which can add a bit to the cost is the grinding disk.

06-30-2009, 11:47 PM	#1
TilionMtl Sandwich Shooter Join Date: Feb 2008 Location: Crabtree, Quebec Local Time: 02:06 AM Local Date: 03-12-2010 Posts: 439 Country: Groans: 5 Groans Received: 11 Thanks: 312 Thanks Received: 1,022	homemade nail adjustment tools Here is some pic of my nails adjustment tools. I bought pliers at the $1 store, and with my dremel and a grinding disk, I made a T shape in the pliers nose, so the head of a nail will fit in the top of the T, and the body of the nail is held down between both pliers tip. It allow me to gently bend the nail if need. nailsadj_01.jpg I recommend trying to find pliers without teeth, or grind them so it don't damage the nails nailsadj_02.jpg It was hard to check the proper spacing between nails. Trying to hold a ball by hand between two nails usually end up with the ball falling off, or not seeing properly. So I made a gauge to see if a ball go between two nails or not. nailsadj_03.jpg I held a pachi ball in metal clamp, because I don't have a vice. Using the dremel and grinder disk, I carved a path all around the ball. I used a metal wire, bent it around the ball in the carved path, bent again the two extra length to join them to make the long handle. I used a little copper wire curved around the two wire of the handle, near the ball to hold the ball in place. I used heat shrinking tube to make the extremity of the handle. It's nice to have the ball at the extremity of a handle about 8" long, to be able to go everywhere, at any angle. nailsadj_04.jpg Of course this gauge have a single size, so it is usefull only to see if a ball can go easily or not between two nails. because the metal wire around the ball is not completely hidden in the ball, and make the ball a bit larger where the wire is, it kinda give me two possibility. I can move the ball between the nails, with the metal wire not agains the nail, this give me the real size, the tighter setting for a ball to go between nais, or I can move the gauge with the wire toward the nails, for an extra spacing between nails. Hope this can give you some ideas. Cost of the nails adjustment tools (pliers and gauge), about $1.50
	Last edited by TilionMtl; 06-30-2009 at 11:50 PM.

07-01-2009, 07:37 AM	#2
musky Thread Killer Join Date: Aug 2005 Location: Houston, TX Local Time: 01:06 AM Local Date: 03-12-2010 Posts: 2,342 Country: Groans: 248 Groans Received: 426 Thanks: 2,681 Thanks Received: 3,039	Re: homemade nail adjustment tools Excellent job, I like homemade tools.
	__________________ Pachislos: Alien, Azteca Returns, Death Valley, Guts, Gamera HGV, Hokuto No Ken, Jet Set Radio, Mephisto, Oasis, Speed Racer, Surprise, Twenty Seven, Thunderbirds, Wild Wolf Pachinkos: Blooming Field, Casino, Freddy vs Jason, Horror Mansion, Indiana Jones, Julie, Lucky Boat of Seven God, Spiderman

07-01-2009, 07:41 AM	#3
Sid Captain Weirdo Join Date: Sep 2005 Location: Athens Greece Local Time: 09:06 AM Local Date: 03-12-2010 Posts: 18,909 Country: Groans: 426 Groans Received: 1,200 Thanks: 16,218 Thanks Received: 20,167 Blog Entries: 2	Re: homemade nail adjustment tools Well done indeed!
	__________________

07-01-2009, 07:48 AM	#4
new in town SNORTARRIFIC! Join Date: May 2007 Location: Jacksonville Florida Local Time: 02:06 AM Local Date: 03-12-2010 Posts: 4,415 Country: Groans: 163 Groans Received: 231 Thanks: 8,969 Thanks Received: 8,231	Re: homemade nail adjustment tools A True "Handi Pachi"
	__________________ 34 Pachislo's, 19 Pachinko's and 3 Pinn's, 1 Wall Pachinko Bar Sign. Can't fit them all. Link to About Me: pachijunkie's Videos AutoSlot

07-01-2009, 01:11 PM	#5
bfree Kungishi Join Date: Dec 2006 Location: Crook County, Illinois Local Time: 02:06 AM Local Date: 03-12-2010 Posts: 1,143 Country: Groans: 129 Groans Received: 37 Thanks: 4,952 Thanks Received: 1,435	Re: homemade nail adjustment tools That's a winner!! great job.
	__________________ *Bill* "Trying Is the First Step towards Failure" Homer J. Simpson

07-01-2009, 02:52 PM	#6
TilionMtl Sandwich Shooter Join Date: Feb 2008 Location: Crabtree, Quebec Local Time: 02:06 AM Local Date: 03-12-2010 Posts: 439 Country: Groans: 5 Groans Received: 11 Thanks: 312 Thanks Received: 1,022	Re: homemade nail adjustment tools There's a US seller which was selling gauges and so on some time ago. Unfortunately he didn't want to ship to Canada, so I made the gauge myself. it's not as pretty as the real adjustment tools, but really useful, I recommend to everyone to get one or make one. The only thing which can add a bit to the cost is the grinding disk.
	__________________ WARNING! These smileys contain violence strong language brief scenes of nudity and are not recommended for younger audience

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nail tools with holster	compirate	Yahoo Japan - Auction Area	0	04-25-2009 12:34 PM
Miracle homemade plastic cleaner???	benjamaniac	Vintage Pachinko	1	03-15-2009 11:49 PM
homemade reset arm for single shot sophia	mudfud	Vintage Pachinko	1	12-30-2008 12:31 PM
Sturdy, inexpensive homemade pachi stand	bf_of_pf	Pachislo Modifications	17	03-10-2006 11:31 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links